582051
8
Zoom out
Zoom in
Previous page
1/16
Next page
POWXG2061 EN
Copyright © 2015 VARO P a g e | 8 www.varo.com
10 OPERATING INSTRUCTIONS
10.1 Prepare the machine
10.1.1 Assembling the Front handle
Fit the front handle absorber (A) on the rear tube (C). While aligning the hole (B) on the front
handle absorberthe position pin (F) on the barrier (E) and one position hole (D) of three on
the rear handle, fit the barrier on the rear handle and insert the position pin into the position
hole on the rear handle. Make sure the barrier is on the left side of the machine. (Fig. 8)
Push down the front handle (G), and then turn four screws (H) clockwise to tighten the front
handle securely. (Fig. 9)
10.1.2 Connecting the tube (Fig. 10)
Align the hole (A1) on the front tube (A) and the lock pin (B). Then, Pull out the Lock pin, and
while inserting the front tube in the connector (D) to the end. After loosened the lock pin, it will
return to its original position automatically, and insert into the hole on the front tube.
Make sure the front tube can’t be rotated after the lock pin came back to its original position.
Turn the lock knob (C) clockwise to tighten the front tube securely.
10.1.3 Fitting blades
When fitting the cutting attachment it is extremely important that the raised
section on the top clamping plate/support flange engages correctly in the
centre hole of the cutting attachment. If the cutting attachment is fitted
incorrectly it can result in serious and/or fatal personal injury.
Never use a cutting attachment without an approved guard. See the chapter
on Technical data. If an incorrect or faulty guard is fitted this can cause
serious personal injury.
If a grass blade are to be used the machine must be equipped with the correct handlebar,
blade guard and harness.
10.1.4 Fitting cutting head (Hedge trimmer)
Fit the cutting head (B) on the shaft tube (A) so that the screw hole on the cutting head is
aligned with the position hole (A1) on the shaft tube as shown. Then, tighten the lock screw (D)
and the position screw (C) securely. (Fig. 11)
Changing the hedge trimmer angle
Press the safety lever (E). Then press the lock lever (F), at the same time hold the grip (G)
and turn the cutting head to a desired angle (α). (Fig. 12)
10.1.5 Adjusting the harness (Fig. 13)
WARNING! When using the machine it must always be hooked securely to
the harness. Otherwise you will be unable to control the brush cutter safely
and this can result in injury to yourself or others. Never use a harness with
a defective quick release.
Single shoulder harness: Put on the harness. Hook the machine onto the harness support
hook. Adjust the length of the harness so that the support hook is roughly level with your right
hip.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG2061 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG2061 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG2061

Powerplus POWXG2061 User Manual - German - 17 pages

Powerplus POWXG2061 User Manual - Dutch - 17 pages

Powerplus POWXG2061 User Manual - French - 17 pages

Powerplus POWXG2061 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info