582051
7
Zoom out
Zoom in
Previous page
1/16
Next page
POWXG2061 EN
Copyright © 2015 VARO P a g e | 7 www.varo.com
See instructions under the heading Start. Start the machine and apply full throttle. Release
the throttle and check that the cutting attachment stops and remains at a standstill. If the
cutting attachment rotates with the throttle in the idle position then the carburetor idle
setting must be checked. (Fig. 4)
8.2 Engine switch (Fig. 5)
Press down the “O” side of the engine switch to stop the engine.
Start the engine and make sure the engine stops when you move the engine switch to the stop
setting.
8.3 Vibration damping system (Fig. 6)
Your machine is equipped with a vibration damping system that is designed to minimize
vibration and make operation easier.
Using incorrectly wound cord or a blunt or incorrect cutting attachment (wrong type or
incorrectly filed, see instructions under the heading Filing the blade) increases the level of
vibration.
The machine′s vibration damping system reduces the transfer of vibration between the engine
unit/cutting equipment and the machine′s handle unit.
Regularly check the vibration damping units for cracks or deformation.
Check that the vibration damping element is undamaged and securely attached.
8.4 Quick release
There is an easily accessible, quick release fitted near the suspension ring as a safety
precaution in case the engine catches fire, or in any other situation that requires you to free
yourself from the machine.
8.5 Muffler
The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away
from the user.
Never use a machine that has a faulty muffler.
Regularly check that the muffler is securely attached to the machine.
The inside of the muffler contain chemicals that may be carcinogenic. Avoid
contact with these elements in the event of a damaged muffler.
Bear in mind that: The exhaust fumes from the engine are hot and may
contain sparks which can start a fire. Never start the machine indoors or
near combustible material!
9 CUTTING EQUIPMENT (FIG. 7)
To ensure good cutting results it is important that the contact pressure between the blades is
correct. The contact pressure is adjusted by turning the screws on the underside of the bar
clockwise as far as they will go. Then turn the screws anticlockwise a 1/4 turn. Lock the
screws using the locking nut on the top of the bar. Check that the screws are loose enough to
allow the washers under the screw heads to slide sideways.
When the blades are correctly adjusted the play between the blades should be 0,20,4 mm,
measured at the screws.
The edges of the blades are too hard to be filed. Dull blades should be sharpened using a
grinder.
Replace the blades if they are bent or damaged.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG2061 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG2061 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG2061

Powerplus POWXG2061 User Manual - German - 17 pages

Powerplus POWXG2061 User Manual - Dutch - 17 pages

Powerplus POWXG2061 User Manual - French - 17 pages

Powerplus POWXG2061 Additional guide - All languages - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info