517145
8
Zoom out
Zoom in
Previous page
1/11
Next page
POWXG1065 EN
Copyright © 2017 VARO P a g i n a | 8 www.varo.com
8.3.4 Sharpening:
Switch machine on (see “Switching on and off“).
By gently pressing on hand grip, (3) lower grinding wheel (2) and grind saw tooth sharp.
To move the chain along, switch machine off. Loosen clamp screw (9) and clamp
following chain link to be sharpened using adjusted stop (10) and clamp screw (9).
First sharpen the saw teeth from one side of the chain. Then adjust the
grinding angle and sharpen the teeth from the other side.
8.3.5 Checking distance from depth limiter (see C figure 3):
The sawing parts of the chain are the cutting links, which consist of a saw tooth (25) and a
shoulder (26) that limits the depth of the saw cut.
The difference in height between the two determines distance A, which limits the cutting depth.
1. After the third sharpening, always check that distance A limiting cutting depth conforms to
the specifications of the manufacturer of the saw chain.
2. File down the depth-limiting shoulder with a flat file and round off the shoulder a little after
sawing depth has been readjusted. The original shape should be retained.
9 MAINTENANCE AND CLEANING
Before working on machine disconnect from mains outlet.
Only have work not described in this instruction manual carried out at a
specialised facility. Use only orginal parts. Allow machine to cool down
before carrying out any maintenance or cleaning work. Risk of burn injury!
Always check machine for visible defects prior to using.
Check grinding wheel in particular. Change damaged parts.
9.1 Cleaning
Chemical substances may cause corrode the machine’s plastic parts. Never
clean machine under running water.
Thoroughly clean machine after every use.
Clean ventilation slits.
9.2 Changing grinding wheel (Fig D)
Switch machine off and disconnect plug from mains. Let machine cool
down.
1. Remove grinding wheel cover (5) by unscrewing fastening screws (4).
2. Lock spindle using fork spanner (24) and loosen hexagonal nut (27) with socket spanner
(23).
3. Remove nut, washer (28), outer flange (29), and grinding wheel (8).
4. Mount new grinding wheel and screw on cover in the reverse order.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWXG1065 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWXG1065 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWXG1065

Powerplus POWXG1065 User Manual - German - 11 pages

Powerplus POWXG1065 User Manual - Dutch - 11 pages

Powerplus POWXG1065 User Manual - French - 12 pages

Powerplus POWXG1065 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info