645717
8
Zoom out
Zoom in
Previous page
1/12
Next page
POWX358 EN
Copyright © 2016 VARO P a g e | 8 www.varo.com
8.1 Adjusting the material volume (Fig. 6)
Set the material volume by turning the regulator knob on the trigger.
Set the material volume by turning the regulator on the trigger guard of the spray gun.
- turn to downside lower material volume.
+ turn to upside higher material volume.
Remark: It is advisable to test the spray gun on cardboard or a similar
surface to find the correct setting. Important: Begin spraying outside of the
target area and avoid interruptions inside the target area.
8.2 Spray technique
The spray result depends heavily on the smoothness and cleanliness of the surface to be
sprayed. Therefore the surface should be carefully prepared and kept free of dust.
Cover all surfaces not to be sprayed.
Cover screw threads or similar parts of the target object.
Correct (Fig. 7a): Be sure to hold the spray gun at an even distance of approx. 20 30 cm
to the target object.
Incorrect (Fig. 7b): Heavy spray fog build-up, uneven surface quality.
An even movement of the spray gun results in an even surface quality.
When coating material builds up on the nozzle (A) and air cap (B) (Fig. 8), clean both parts
with a solvent or water.
9 TAKING OUT OF OPERATION AND CLEANING
Turn the machine off. Activate the trigger guard so that the coating material in the spray
gun flows back into the container.
Unscrew the container. Empty any remaining coating material back into the material tin.
Pre-clean the container and feed tube with a brush.
Pour solvent or water into the container. Screw the container back on.
Use only solvents with a flashpoint over 21 °C.
Turn on the machine and spray the solvent or water into a container or a cloth.
Repeat the above procedure until the solvent or water emerging from the nozzle is clear.
Turn the machine off.
Then empty the container completely. Always keep the container seal free of coating
material residue and check for damage.
Press down the quick release button (A) and pull out the front part of the spray gun. Clean
it thoroughly. Disassemble the nozzle parts and clean each part separately (Fig. 9).
Clean the outside of the spray gun and container with a cloth soaked in solvent or water.
Reassemble the nozzle back onto the sprayer (Fig. 10).
Caution! Never clean nozzle or air holes in the spray gun with sharp metal
objects.
10 MAINTENANCE
10.1 Change the air filter (Fig. 11)
Change the air filter (A)if it is soiled. Release the cover fastening from the machine, place the
air filter in the cover. Push the cover back onto the machine.
WARNING! Never operate the machine without the air filter; dirt could be
sucked in and interfere with the function of the machine.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX358 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX358 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX358

Powerplus POWX358 User Manual - German - 13 pages

Powerplus POWX358 User Manual - Dutch - 13 pages

Powerplus POWX358 User Manual - French - 13 pages

Powerplus POWX358 Additional guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info