645717
7
Zoom out
Zoom in
Previous page
1/12
Next page
POWX358 EN
Copyright © 2016 VARO P a g e | 7 www.varo.com
7 USE
7.1 Preparation of the coating material
Before spraying, the material being used may need to be thinned with the proper solvent as
specified by the material manufacturer.
Never exceed the thinning advice given by the coating manufacturer.
Note: Material to be sprayed should always be strained to remove any
impurities in the paint which may enter and clog the system. Impurities in
the paint will give poor performance and a poor finish.
7.2 Thinning chart (Fig. 2)
Hold the test cup up and measure the time in seconds until the liquid empties out. This
time is called "Runout Time in Seconds".
Note : stir the spraying material thoroughly before measuring and fill into
the canister.
8 START-UP
Before connecting to the mains supply, be sure that the supply voltage is identical with the
value given on the rating plate.
Unscrew the container from the spray gun.
Aligning suction tube (Fig. 3).
The container contents are to be sprayed out almost completely. When spraying horizontal
surfaces, turn suction tube forward (A). When spraying objects overhead, turn suction tube
back (B).
Pour in the prepared coating material and screw the container tightly onto the spray gun.
Mounting air hose. Insert the air hose coupler tightly in the connections on the machine
and the spray gun (Fig. 4).
Adjust the spray setting on the spray gun.
Three different spray jet settings can be chosen on the spray gun, depending on the
application and target object.
Selecting the Spray Setting
Fig. 5 A = horizontal fat jet
Fig. 5 B = circular jet
Fig. 5 c = vertical fat jet
The spray pattern indication can be found on the front part of the sprayer (Fig. 5D, A). With
the arrowhead towards the boss on the tip (Fig. 5D, B).
Push the ON / OFF switch on the machine and start painting (Fig. 6).
Material Runout Time (seconds)
Oil enamel 25-45
Oil based primer 30-50
Varnish 20-55
Lacquer / lacquer sanding sealer 25-40
Oil stain No thinning required
Clear sealer No thinning required
Polyurethane No thinning required
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX358 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX358 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX358

Powerplus POWX358 User Manual - German - 13 pages

Powerplus POWX358 User Manual - Dutch - 13 pages

Powerplus POWX358 User Manual - French - 13 pages

Powerplus POWX358 Additional guide - All languages - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info