582659
7
Zoom out
Zoom in
Previous page
1/10
Next page
POWX1110 EN
Copyright © 2015 VARO P a g e | 7 www.varo.com
8.3 Planing
Choose the desired cutting depth before operation.
Hold the planer with one hand on the switch and the other hand on the adjustment knob
(2).
Place planers shoe on the surface to be planed. Making certain that the cutting blades are
not touching the surface.
Push down firmly on the adjustment knob of the planer. So that the planers base is
completely flat on the work piece surface. Depress the lock-off button and push the trigger
switch. Allow the motor to reach full speed before starting to plane.
Move the tool slowly over the work piece and maintain downward pressure to keep the
planer flat. Be particularly careful to keep the tool flat at the beginning and the end of the
work piece surface.
ATTENTION: Never change the cutting depth while operating , to not create any
irregularities on the planed surface.
8.4 Rebating (Fig. 7)
The “L” depth guide (18) is used in conjunction with the parallel guide assembly (12) for
rebating applications.
The depth of rebating is determined by the depth of cut and the number of passes made
along the work-piece. The maximum rebate depth is 18 mm, made in several passes up to
3mm each time. The Maximum width of a rebate cut is 82mm and is determined by the
setting of parallel guide assembly (12).
Fit the “L” depth guide (18) and the parallel guide assembly to the planer on the opposite
sides of the tool.
Adjust the parallel guide assembly according to the required cutting width and tighten the
wing screw (8).
Place the tool on a flat surface with the rear base (16) flat on the surface, adjust the “L”
depth guide so the distance between the bottom surface of the “L” depth guide and the flat
surface equals the desired rebating depth, and tighten the wing screw (8) of “L” depth
guide.
Set the adjustment knob of cutting depth (2) to a suitable depth.
Carry out the planing with the flat surface of parallel guide assembly kept tight against the
edge of your workpiece. Repeat cutting until the bottom surface of “L” depth guide is level
with the work-piece surface.
8.5 Edge chamfering (Fig. 8)
Your planer has 3 precision machine grooves (11) in the front base (10) for planing along
a corner of the wood. Its a good idea to try a scrap piece of wood before doing final
pieces.
8.6 Dust extraction
When using the planer dust will be generated.
Always use the dust bag supplied with your product.
The dust extraction outlet can be connected to an external vacuum cleaner to extract while
operating.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1110 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1110

Powerplus POWX1110 User Manual - German - 11 pages

Powerplus POWX1110 User Manual - Dutch - 10 pages

Powerplus POWX1110 User Manual - French - 10 pages

Powerplus POWX1110 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info