582659
6
Zoom out
Zoom in
Previous page
1/10
Next page
POWX1110 EN
Copyright © 2015 VARO P a g e | 6 www.varo.com
7 ADJUSTMENTS/SETTINGS
7.1 Remove the blades (Fig. 1)
Place the tool on a table with the base plate pointing towards you.
Press and hold the spring-loaded protective cover, and unscrew the 3 installation bolts
with the spanner provided.
Slide the blade out of its holder.
If one of the blades is damaged, always replace both blades.
7.2 Install the blades (Fig. 2)
First clean out all chips or foreign material adhering to the drum(a) or blades(b)
Always replace blades with same dimension and weight.
Slide the blade into the blade holder. The blade must be level with the planer’s base plate
The blade must be positioned exactly in the middle of the blade holder.
Tighten the 3 installation bolts.
Always unplug the tool before replacing the cutters.
7.3 Setting the planing depth (Fig. 3)
Prior to any assembly and adjustment always unplug the tool.
Plane depth is variable from 0 to 3.0 mm. This is adjustable by rotating the adjustment
knob of cutting depth (2).
As the knob is rotated clockwise from the 0 position the cutting depth will increase from 0
to as much as 3.0 mm.
It is recommended that test cuts are made in scrap wood after each re-adjustment to
make sure the desired amount of wood is being removed by the planer.
Several shallow passes will produce a smoother finish than one deep pass.
7.4 Mounting and setting the parallel guide (Fig. 4)
The parallel guide assembly is for use when you wish to plane parallel to the work piece.
Secure the parallel guide holder to the left-hand side or right-hand side of the planer using
the wing screw .
Now secure the parallel stop guide rail “T” to the holder using the wing screw and the
knob. The guide rail must always point downwards.
Set the required distance between the guide rail and the work piece.
Tighten the knob on the guide rail.
8 OPERATION
8.1 Switching on and off (Fig. 5)
Before engaging the on/off switch, check the blades are fitted properly.
Connect the plug to the power supply
To switch on the planer, press the lock-on button (5) and push the ON/OFF switch trigger
(4).
When you release the ON/OFF switch trigger, the machine turns off.
8.2 Drive belt replacement (Fig. 6a, 6b)
Remove the belt cover (7) by unscrewing the 3 installation bolts.
Wear gloves, turn the driven pulley by one hand slowly and pull the belt out by another
hand until the belt fallsl out of the pulley.
To install the belt proceed in reverse order.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX1110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX1110 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX1110

Powerplus POWX1110 User Manual - German - 11 pages

Powerplus POWX1110 User Manual - Dutch - 10 pages

Powerplus POWX1110 User Manual - French - 10 pages

Powerplus POWX1110 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info