675035
17
Zoom out
Zoom in
Previous page
1/20
Next page
POWX07582 EN
Copyright © 2017 VARO P a g e | 17 www.varo.com
Saw blades made of high-speed steel (HSS)
Damaged saw blades
Saw blades with missing teeth
HAZARD!
Only use OEM components for installing the saw blade.
Do not use loose reduction rings; the saw blade could come loose.
Saw blades must be mounted in such a way that they cannot wobble, and that they cannot
come loose during operations.
Install the outer saw flange (E2).
The two flanges must fit over the surfaces of the saw shaft.
Insert the shaft bolt (E1) (left-turning thread) and tighten with a hexagonal spanner.
HAZARD!
Do not lengthen the spanner, so that you can exercise more power.
Do not hit on the spanner with a hammer, for tightening the shaft.
The spanner must be removed, after the shaft that has been tightened.
Install the saw table and mount the corresponding screws.
11.2.6 Replacing the saw guide (21)
HAZARD!
If the saw guide has been damaged, then small pieces can become jammed between the
guide and the saw, which can block the saw blade. Immediately replace a defective saw
guide..
Remove the saw guide (13).
Remove the defective piece by dislodging it with a screwdriver.
Insert a new piece and click it in position.
Reinstall the saw guide (13).
11.3 Modifications
11.3.1 Modifications on the mitre and width guide (Fig. 7)
Loosen the attachment screws (L1) of the guide.
Adapt the guide so that it is positioned exactly at right angles to the saw blade, when the
mitre table (11) is in the 0° position.
Retighten the attachment screws of the guide.
11.3.2 Modifications on the mitre scale indicator (Fig. 8)
After loosening the screw (M2), adapt the position of the indicator (M1) until the value that is
indicated corresponds to the currently preset stop position of the turntable.
Note:
The mitre table is preset to stop positions at 0°, 15°, 22.5°, 30°, 45° and 60°.
11.3.3 Modification of the bevelling angle indicator (Fig. 9)
Lock the support arm (N2) in the 0° position.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX07582 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX07582 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX07582

Powerplus POWX07582 User Manual - German - 22 pages

Powerplus POWX07582 User Manual - Dutch - 22 pages

Powerplus POWX07582 User Manual - French - 21 pages

Powerplus POWX07582 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info