675011
7
Zoom out
Zoom in
Previous page
1/19
Next page
POWX07551T EN
Copyright © 2016 VARO P a g e | 7 www.varo.com
Do not use saw blades made of HSS steel.
Do not use bent, deformed or otherwise damaged saw blades.
Do not use saw blades which do not meet the specifications stated in this manual.
Before sawing, remove all nails and other metal objects from the workpiece.
Never start sawing before the saw reaches its full speed.
Securely clamp the workpiece.
Never attempt to saw extremely small workpieces.
Only leave the machine after switching off and when the saw blade has come to a
complete standstill. Pull down the saw head and press in the locking knob.
Never try to slow the saw blade down by exerting pressure on the side.
Before performing maintenance to the machine, always unplug the machine.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS
WARNING! The laser beam potentially causes severe eye damage. Never
look or stare directly into the laser beam.
During use, do not point the laser beam at people, directly or indirectly
through reflecting surfaces.
The unit includes no servicing components. Do not open the housing for any reason. If the
unit is damaged, have the damage repaired by an authorized repair agent
8 ASSEMBLY
WARNING! To avoid injury, do not connect this mitre saw to a power source
until it is completely assembled and adjusted and you have read and
understood the operator’s manual.
8.1 Installing the mitre handle (Fig. 1)
Thread the mitre handle (E) into the hole located at the front of the mitre saw (A).
8.2 Installing the dust bag (Fig. 2)
Squeeze the metal collar wings on the dust bag (C).
Place the dust bag neck opening around the exhaust port on the mitre saw (A) and
release the metal collar wings.
NOTE: To empty the dust bag, squeeze the metal collar wings and remove
from exhaust port. Open zipper on underside of bag and empty into waste
container.
IMPORTANT: Check frequently and empty bag before it gets full.
WARNING! Do not use this saw to cut and/or sand metals. The hot chips or
sparks may ignite sawdust from the bag material.
8.3 Installing the hold-down clamp (Fig. 3)
NOTE: There are two mounting holes for the hold-down clamp. These are
located just behind the fence on the left and right side of the base.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX07551T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX07551T in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX07551T

Powerplus POWX07551T User Manual - German - 21 pages

Powerplus POWX07551T User Manual - Dutch - 21 pages

Powerplus POWX07551T User Manual - French - 21 pages

Powerplus POWX07551T Additional guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info