480926
7
Zoom out
Zoom in
Previous page
1/11
Next page
POWX075 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
8.4 Checking and adjusting the saw blade depth (fig. C)
Follow the "Instructions for use" to perform a test cut.
If the saw blade does not cut the workpiece completely,adjust as follows:
Loosen the lock nut (22) on the adjusting screw (23).
Turn the adjusting screw to allow the saw blade to achieve the required depth.
Tighten the lock nut.
8.5 Replacing the saw blade (fig. D)
Before replacing the saw blade always unplug the tool. Do not use saw blades
made of HSS steel. Only use saw blades suitable for a speed of at least 6000
min
1
. Make sure that the spindle diameter and the saw blade bore match.
Only use sharp and undamaged saw blades. Cracked or bent saw blades must be replaced
immediately.
Lock the slide mechanism.
Lock the head of the machine in its highest position.
Keep the unlock handle machine head (3) depressed and turn the lower saw blade guard
(12) fully upward. Place the supplied wrench onto the fixing screw (24).
Depress the lock knob (25) and keep it depressed.
Loosen the fixing screw (24) and remove it.
Remove the outer flange (26), the old saw blade (27), the adapter (28) and the inner
flange (29).
Clean the flanges and the adapter.
Place the inner flange and the adapter.
Place the new saw blade with the teeth pointing in the direction of rotation. See the arrow
on the housing (30).
Place the outer flange on the saw blade.
Mount the fixing screw and tighten it.
Lower the saw blade guard.
8.6 Setting the mitre angle (tig. A)
The mitre angle is left/right infinitely variable between 0° and 45°.
Loosen the lock knob (7).
Set the required mitre angle using the scale (10).
Tighten the lock knob.
8.7 Setting the bevel angle (fig. A)
The bevel angle is infinitely variable between 0° and 45°.
Loosen the lock knob (16).
Set the required bevel angle using the scale (15).
Tighten the lock knob.
8.8 Setting the groove depth (fig. E)
Using the grooving feature, the machine can be used to make crosswise or slant grooves in
workpieces.
Slide the groove stop (8) into position.
Loosen the lock nut (31) on the adjusting screw (32).
Turn the screw in or out to set the groove depth.
Tighten the lock nut.
Slide the groove stop out of the way to cancel the groovingfeature.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX075 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX075 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX075

Powerplus POWX075 User Manual - German - 12 pages

Powerplus POWX075 User Manual - Dutch - 12 pages

Powerplus POWX075 User Manual - French - 12 pages

Powerplus POWX075 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info