480926
6
Zoom out
Zoom in
Previous page
1/11
Next page
POWX075 EN
Copyright © 2014 VARO P a g e | 6 www.varo.com
Do not use saw blades made of HSS steel.
Do not use bent, deformed or otherwise damaged saw blades.
Do not use saw blades which do not meet the specifications stated in this manual.
Before sawing, remove all nails and other metal objects from the workpiece.
Never start sawing before the saw reaches its full speed.
Securely clamp the workpiece.
Never attempt to saw extremely small workpieces.
Only leave the machine after switching off and when the saw blade has come to a
complete standstill. Pull down the saw head and press in the locking knob.
Never try to slow the saw blade down by exerting pressure on the side.
Before performing maintenance to the machine, always unplug the machine.
7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS
Warning! The laser beam potentially causes severe eye damage. Never look
or stare directly into the laser beam.
During use, do not point the laser beam at people, directly or indirectly
through reflecting surfaces.
This laser complies with class 2 according to EN 60825-1:1994. The unit includes no
servicing components. Do not open the housing for any reason. If the unit is damaged,
have the damage repaired by an authorized repair agent
8 ASSEMBLY
8.1 Mounting the machine (fig. A)
The machine must be screwed to a workbench.
Mark the position of the mounting holes (9) on the workbench.
Drill holes at each of the marked positions, adjusting the diameter and depth of the holes
to the screws used.
Place the machine on the workbench and insert the screws into the mounting holes.
Firmly tighten the screws.
8.2 Adjusting the sawing angle (fig. A&B)
The default angle between the saw blade and the saw table is 90°.
Use a set square to check that the angle between the saw blade and the table top (13) is
90°. If the angle does not measure 90° adjust as follows:
Loosen the head lock down knob (5) and move the head so the saw blade reaches a 90°
angle.
Loosen the locknut on the adjusting screw (18) and screw the adjusting screw in or out to
achieve a 90° angle. Retighten the locknut.
Tighten the lock knob.
Loosen the screw (19) and adjust the pointer (20) so that it registers 0°. Tighten the screw.
8.3 Adjusting the bevel angle (fig. A&C)
The max. bevel angle is 45°.
Loosen the lock knob (16) and turn the head to the utter bevel angle.
Check the bevel angle using the scale (15). If the angle does not measure 45° adjust as
follows:
Loosen the locknut on the adjusting screw (21) and screw the adjusting screw in or out to
achieve a 45° angle. Retighten the locknut.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX075 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX075 in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX075

Powerplus POWX075 User Manual - German - 12 pages

Powerplus POWX075 User Manual - Dutch - 12 pages

Powerplus POWX075 User Manual - French - 12 pages

Powerplus POWX075 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info