676177
9
Zoom out
Zoom in
Previous page
1/12
Next page
POWX0026LI EN
Copyright © 2017 VARO P a g e | 9 www.varo.com
The torque force is set by means of a torque setting according to the size of screw and the
kind of material. Select the suitable torque for the job to be performed. Long screws and/or
hard material require a higher torque setting.
8.6 Speed selector (Fig. 7)
NOTE the L-mark is the “Low speed position, the H-mark is the “High speed” position
(marks moulded in the button of two speed selector (3).)
The drill has a two-speed gear box designed for drilling at L (LOW) or H (HIGH) speed. The
gear selector is located on top of the drill to select either low or high speed. When you push
the button (5) forward and select low speed range, the speed will decrease but will provide
more power and torque.
When using the drill in the high speed range, the speed will increase but will provide less
power and torque. Use the low speed for high power and torque applications and the high
speed for fast drilling applications.
Important: NEVER adjust this two speed selector3while the drill is running. Always let it
come to a complete stop.
8.7 LED light (Fig. 8)
The LED work-light9can be lit prior to motor running.
Press the on/off switch lightly, to keep the work area lighted.
It also lights during operation.
NOTE: The LED work-light is switched off delayed with about 5 sec.
WARNING:
Do not stare directly at the light beam. Never aim the beam at any person or an object other
than the work piece.
Do not deliberately aim the beam at persons!
8.8 Drilling
Before drilling, the torque setting should be set on the drill position ”.
When drilling hard smooth surface, use a centre punch to mark the desired hole location. This
will prevent the drill bit from slipping off centre as the hole is started. Hold the tool firmly and
place the tip of the drill or bit into the work piece, applying only enough pressure to keep the
bit cutting. Do not force or apply side pressure to elongate a hole.
8.8.1 Drilling in wood
For maximum performance, use high speed steel (HSS° drills for wood drilling, turn the torque
setting on the drill position“ ”. Begin drilling at a very low speed to prevent the bit from
slipping off the starting point. Increase the speed as the drill bit bites into the material. When
drilling through holes, place a block of wood behind the work piece to prevent ragged or edges
on the back side of the hole.
8.8.2 Drilling in metal
For maximum performance, use high speed steel (HSS) drill bits for metal or steel drilling.
Turn the torque setting on the drill position“ ”. Begin drilling at a very low speed to prevent
the bit from slipping off the starting point. Maintain a speed and pressure which allows cutting
without overheating the bit. Applying too much pressure will overheat the drill, wear the
bearings, bend or burn bits, produce off-centre or irregular shaped holes.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWX0026LI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWX0026LI in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWX0026LI

Powerplus POWX0026LI User Manual - German - 14 pages

Powerplus POWX0026LI User Manual - Dutch - 13 pages

Powerplus POWX0026LI User Manual - French - 13 pages

Powerplus POWX0026LI Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info