725406
9
Zoom out
Zoom in
Previous page
1/21
Next page
POWPG20130 EN
Copyright © 2019 VARO P a g e | 9 www.varo.com
Warning: the purpose of the chain brake is to reduce the possibility of injury
due to kickback; however, it cannot provide the intended measure of
protection if the saw is operated carelessly. Always test the chain brake
before using your saw and periodically while on the job.
7.3.6 To test chain brake:
The chain brake is disengaged (chain can move) when brake lever is pulled back and
locked. Be sure the chain brake latch is in the off position. (Fig. 7a)
The chain brake is engaged (chain is stopped) when brake lever is in forward position and
the chain brake latch is in the on position. You should not be able to move chain. (Fig. 7b)
Note: the brake lever should snap into both positions. If strong resistance is
felt, or lever does not move into either position, do not use your saw. Take it
immediately to a professional service centre for repair.
Don’t let your motor run in high speed when your chain brake is activated.
8 FUEL AND LUBRICATION
8.1 Fuel
Use regular grade unleaded gasoline mixed with 40:1 custom 2-cycle engine oil for best results.
Use mixing ratios in section fuel mixing table below.
Warning: never use straight gasoline in your unit. This will cause permanent
engine damage and void the manufacturer’s warranty for that product. Never
use a fuel mixture that has been stored for over 90 days.
Warning: 2-cycle lubricant must be a premium grade oil for 2-cycle air cooled
engines mixed at a 40:1 ratio. Do not use any 2-cycle oil product with a
recommended mixing ratio of 100:1. If insufficient lubrication is the cause of
engine damage, it voids the manufacturer’s engine warranty.
8.2 Mixing fuel
Add oil to an approved fuel container followed by the gasoline to allow incoming gasoline to mix
with oil. Shake container to ensure thorough mix.
Warning: Lack of lubrication voids engine warranty. Gasoline and oil must
be mixed at 40:1
8.2.1 Fuel and lubrication symbols
40:1
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWPG20130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWPG20130 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWPG20130

Powerplus POWPG20130 User Manual - German - 23 pages

Powerplus POWPG20130 User Manual - Dutch - 23 pages

Powerplus POWPG20130 User Manual - French - 24 pages

Powerplus POWPG20130 Additional guide - All languages - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info