676315
8
Zoom out
Zoom in
Previous page
1/10
Next page
POWE41030 EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
NEVER use this machine for wet sanding.
ALWAYS use adequate respiratory protection when sanding.
Allow the machine to reach the required speed before bringing the sanding paper into
contact with the workpiece
Start with a coarse grit paper, and work through progressively finer grit papers until the
desired finish is achieved
Apply only moderate pressure to the sander. Pressing too hard onto the work surface may
overheat the motor or damage the work surface
Sand evenly over the work surface. The machine works in a rotary motion so it is not
necessary to work with the grain
Only use the sander 'flat on' to the work. Tilting the sander onto its edge will damage your
workpiece
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
9.2 Maintenance
Our machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and
regular cleaning.
10 TROUBLE SHOOTING
Should the machine fail to function correctly, a number of possible causes and the appropriate
solutions are given below:
10.1 Machine fails to operate.
Power turned off.
(Extension) cable damaged.
10.2 The elektromotor hardly reaches maximum speed.
The extension cable is too thin and/or too long.
The mains voltage is lower than 230 V.
10.3 Machine overheats.
Air vents are blocked. Clean them with a dry cloth.
The machine has been overloaded. Use the machine for the purpose it is made for
10.4 Excessive sparking or elektromotor runs irregular.
There’s dirt inside the motor or the carbon brushes are worn.
Replace the carbon brushes or bring the machine to a specialized repair centre.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWE41030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWE41030 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWE41030

Powerplus POWE41030 User Manual - German - 11 pages

Powerplus POWE41030 User Manual - Dutch - 11 pages

Powerplus POWE41030 User Manual - French - 11 pages

Powerplus POWE41030 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info