676315
7
Zoom out
Zoom in
Previous page
1/10
Next page
POWE41030 EN
Copyright © 2017 VARO P a g e | 7 www.varo.com
8 USE
Always follow the safety instructions and keep to the applicable
regulations.
Hold the machine away from the work piece when turning it on and off.
Always first turn the machine off after use before removing the plug from the socket.
8.1 Speed control Fig. 5
The speed of the disc can be controlled with the rotary knob on top of the handle. The higher
the position, the higher the speed.
When applying the wax and polishing do not start at a high speed.
8.2 Switching on and off Fig. 6
Start the machine by pushing the on/off switch. (a)
You can use the locking knob for continuous use. (b)
8.3 Switch Off
Release the switch.
When you are using the locking knob you need to push the on/off switch to disengage.
The polisher will continue to run after it is turned off.
Only lay the machine down once the motor has completely stopped turning. Do not put the
machine on a dusty surface. Dust particles can penetrate the machine.
Never use the spindle key to stop the motor turning.
8.4 Polishing tips
Ensure that the area to be polished is clean and dry
Choose only polishing compounds that are compatible with the material to be polished,
and with the method of application. Read and understand all information supplied with
your polishing compound before use
If using polishing sponges, apply polishing compound evenly to the polishing sponge and
place the sponge against the work surface
Hold the machine securely, using both hands, by the handles provided. The polishing
sponge should make only light contact with the work surface
Switch on the machine, and work across the surface using a wide 'sweeping' motion. Stop
and apply extra compound as required
When the entire surface has been covered, stop the machine and allow the compound to
dry (follow manufacturer’s guidance)
Attach a clean polishing bonnet to the machine and work across the surface as before,
until all visible polishing compound is removed
8.5 Sanding tips
This machine is primarily designed as a polishing tool. It is suitable for light
duty sanding tasks, e.g. fine sanding as a preparation to polishing, but it
has not been designed to remove large amounts of material. Use a different
type of sander, e.g. a belt sander, should this be required.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWE41030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWE41030 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWE41030

Powerplus POWE41030 User Manual - German - 11 pages

Powerplus POWE41030 User Manual - Dutch - 11 pages

Powerplus POWE41030 User Manual - French - 11 pages

Powerplus POWE41030 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info