676334

Powerplus POWE40040 Manual

6
Zoom out
Zoom in
Previous page
1/8
Next page
POWE40040 EN
Copyright © 2019 VARO P a g e | 6 www.varo.com
8.3 Variable speed control
The operator can adjust variable speed by turning the speed adjustment dial (9), It is the
highest speed in the “6” position, gradually slow down, lowest speed in the “1” position.
9 OPERATION
▪ Check that the right type of sanding belt is fitted.
▪ Hold the sander with one hand on the handle (2) and the other on the auxiliary handle (3).
Switch on by pressing the ON/OFF switch trigger (10). Apply the sander to the work piece.
Sand lengthways along the work piece.
▪ Give the sander time to work. It is rarely necessary to press the sanding belt hard against
the surface to be worked. Start with coarse sandpaper and switch to finer paper if/when
required. If a very smooth surface is required, clean the item thoroughly with a soft cloth
after the final sanding. Switch to very fine sandpaper and give the item one extra sanding.
▪ Avoid blocking the vent holes with your hand, as this may cause the sander to overheat.
▪ Switch off by releasing the ON/OFF switch trigger.
9.1 Surrounding Conditions
The power tool is designed for 230 Volt alternating current voltage with a power frequency of
50 Hz. Check whether the extension cord is undamaged and is correctly connected to the
electrical socket of the power grid and the power plug of the power tool. Your professional
advisor will be happy to inform you about the selection of the correct extension cord.
10 MAINTENANCE AND CARE
Please Note! Always pull out the power plug before cleaning!
Make sure that the ventilation slots are free in order to avoid overheating and the damage to
the machine connected with it. Despite this, should the machine overheat, switch it off for
several minutes for cooling. Do not use any solvents for cleaning the plastic parts. Various
chemicals can corrode and damage the parts. Use only clean cloths for the removal of dirt, oil,
grease and dust etc. In the event of excessive sparking, check the carbon brushes. Make sure
that no fluids enter the machine. Only have the replacement of the electrical cord performed
by an electrical specialist. In order to be able to make optimal use of the belt sander, always
use original accessories, which are available at every specialty store.
11 TECHNICAL DETAILS
230-240V
50Hz
1010W
0-380m/min
2 m
73x155 mm
Yes
Yes
Yes
yes
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWE40040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWE40040 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWE40040

Powerplus POWE40040 User Manual - German - 9 pages

Powerplus POWE40040 User Manual - Dutch - 9 pages

Powerplus POWE40040 User Manual - French - 9 pages

Powerplus POWE40040 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info