676334

Powerplus POWE40040 Manual

5
Zoom out
Zoom in
Previous page
1/8
Next page
POWE40040 EN
Copyright © 2019 VARO P a g e | 5 www.varo.com
▪ Immediately switch the machine off if it becomes jammed.
▪ Asbestos-containing materials may not be worked on!
▪ Touching or breathing in of the dust particles constitute a hazard for the machine operator
and other persons in the vicinity.
7 ASSEMBLY
Do not sand plaster surfaces, (WARNING: In this case your guarantee
becomes void) this may clog the motor (brushes, ball bearings,...).
Remove the power tool from the packaging. Do not plug it into the electrical grid before
assembly.
7.1 Grinding Belt Selection
Type K# for work on wood, iron and steel work pieces.
Belt Grain
Use
K 40
Rough machining
K 60
K 80
Medium, rough machining
K 100
K 120
K 150
Fine machining
K 180
K 240
For rough grinding, please use a belt with a belt grain size of 40# and 60#. For finer grinding,
use one of the corresponding finer grain sizes. On uneven surfaces, first use a rough grinding
belt for smoothing and then a finer belt for the fine work.
7.2 Replacing the Sand Belt Fig. 1-2-3)
Disconnect the sander from the mains.
Pull out the locking lever in the side of the belt sander to loosen the sand belt (16) from the
rollers. Select a sanding belt with the appropriate grain size for the task.
Fit the sand belt onto the rollers.
The arrows on the sand belt must follow the direction of rotation.
Lock the sanding belt in place using the locking lever (5).
Switch on the sander and check that the sand belt runs continuously in the centre of the rollers.
If it does not, use the adjusting screw (15) to adjust the position of the sand belt.
8 USE
8.1 Installing the Dust collection bag (Fig. 4)
Attach the dust collection bag (1) with the help of the wire frame to the opening on the dust
discharge outlet of the machine. When the dust bag is too full, it affects the suction power.
Therefore, it is advisable to empty the bag as soon as it is 2/3 full. To empty, open the catch
on the bottom side of the dust collection bag.
8.2 Switching ON/OFF (Fig. 5)
Connect the plug to the power supply，the power-on indicator (12) is illumed until the tool
disconnect from the power mains.
The ON/OFF switch trigger (10) is located on the handle of the belt grinder.
The switch can be locked in place with the use of the lock-on button (11) on the side of the belt
grinder. Press the ON/OFF switch trigger and subsequently the Lock on button. The machine
now runs in continuous operation. The lock is disengaged by means of another pressing of the
ON/OFF switch trigger.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWE40040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWE40040 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWE40040

Powerplus POWE40040 User Manual - German - 9 pages

Powerplus POWE40040 User Manual - Dutch - 9 pages

Powerplus POWE40040 User Manual - French - 9 pages

Powerplus POWE40040 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info