675235
9
Zoom out
Zoom in
Previous page
1/14
Next page
POWE30040 EN
Copyright © 2017 VARO P a g e | 9 www.varo.com
10.3 Laser line generator
Warnings: Do not stare directly at the laser beam, do not deliberately aim
the beam at personnel and ensure that it is not directed towards the eye of
a person for longer than 0.25 s.
When you make the line of the cut on the work piece, the laser line
generator can help you get better alignment.
Your saw has a laser light which power is supplied by battery.
The laser generator switch (2) locates at the front of safety lock button for mechanical plunge
stop (3).
Turn on: Press the laser generator switch (2) to “I” position, the laser generator (1) works.
Turn off: Press the switch (2) to “O” position again.
Make sure line of the cut is on the work piece.
Adjust the depth of cut as required.
Plug in the machine and start the motor.
When the blade is at its maximum speed (approximately 5 seconds), place the saw on the
work-piece.
Switch on the laser generator (1) from the laser aperture using the laser generator switch
(2).
Align the beam with the mark on the work-piece and slowly push the saw forward using
both hands, keeping the red light beam on the mark.
Switch off the laser beam when completion of the cut.
When the battery power is run out, please change the battery by pull out the laser battery
box cover.
10.4 Line following
A V-shaped pointer and pointer locate at the front and the rear position of the base plate (16)
which allow a line to be followed, when cutting. (Refer to Fig. 6)
10.5 Dust extraction
The plunge saw is a powerful tool capable of producing a large amount of dust. As the tool has
a fully enclosed blade, forced dust extraction is particularly efficient. Forced dust extraction
should be used for all but small trimming jobs.
Push the dust adaptor (12) on to the dust extraction nozzle (15).
Connect a vacuum device approved for the extraction of sawdust and splinters to the dust
adaptor (12).
11 CUTTING
WARNING! Before using the machine, need to check the function of
removable protective cover (11) can be used properly.
WARNING: Always cut in a forward direction. Never draw the tool
backwards. If you are a novice user, practice by cutting thin wood until
proficient.
Check the specifications to ensure the suitability of the material to be cut.
Fit the correct blade ensuring it is sharp and not damaged.
Set the depth of cut. (See Setting the cutting depth section)
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWE30040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWE30040 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWE30040

Powerplus POWE30040 User Manual - German - 15 pages

Powerplus POWE30040 User Manual - Dutch - 15 pages

Powerplus POWE30040 User Manual - French - 16 pages

Powerplus POWE30040 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info