675235
8
Zoom out
Zoom in
Previous page
1/14
Next page
POWE30040 EN
Copyright © 2017 VARO P a g e | 8 www.varo.com
9.2 Changing a saw blade
WARNING: Incorrect positioning of the blade can permanently damage the
tool.
Ensure the tool is unplugged from the mains supply.
Press and hold the spindle lock button (14) on, release the clamping screw with plain
washer (7) by using the inner hexagon wrench (turn clockwise to open). Remove the
clamping screw with plain washer (see Fig. 2, 3 and 4).
Set the cutting depth to the maximum. (See Setting the Cutting Depth section)
Lift up the base plate (16).
Remove the saw blade.
The installation of a saw blade is done in the reverse order.
Press the spindle lock button (14) (until it engages) and tighten the clamping screw (7)
firmly.
NOTE: The arrow on the saw blade must agree with the arrow showing the
direction of rotation (running direction shown on the device).
10 OPERATION
10.1 Holding and switching ON/OFF
WARNING: Before engage the ON/OFF switch, check that the saw blade is
properly fitted and runs smoothly, and that the blade clamp screw (7) is well
tightened.
Connect the plug to the power supply.
10.1.1 Switching on the tool:
To switch on: Slide the ON/OFF switch (5) backwards and hold.
To switch off : Release the ON/OFF switch (5).
Warning: The saw blade continues to rotate after the tool is switched off.
Note: Carry out a trial cut in a piece of waste wood.
10.1.2 Releasing the plunge stop
Press the rear position of safety lock button (3) downwards and keep it pressed (refer to the
direction of arrow on Fig. 5).
NOTE: Pressing the safety lock button (3) unlocks the plunge cut
mechanism at the same time, so that the motor can be moved downwards.
The saw blade emerges from the removable protective cover (11).
10.2 Setting the guide fence
Release the lock screw for guide fence (10) on the base plate (16) and set the guide fence in
the guide fence slot (9). Set a desired width and retighten the lock screw for the guide fence
(10).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWE30040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWE30040 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWE30040

Powerplus POWE30040 User Manual - German - 15 pages

Powerplus POWE30040 User Manual - Dutch - 15 pages

Powerplus POWE30040 User Manual - French - 16 pages

Powerplus POWE30040 Additional guide - All languages - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info