POWDPG75270 EN
Copyright © 2021 VARO P a g e | 10 www.varo.com
Inspect the area to be worked before starting. Remove any objects or debris that could be
thrown by the cordless leaf blower.
Select the blow function using the selector lever (8) on the side of the machine and switch the
machine on. With the cordless leaf blower resting on its wheels move the cordless leaf blower
forwards directing the nozzle at the debris to be cleared.
Alternatively hold nozzle just above the ground and swing the machine from side to side,
moving forwards and directing the nozzle at the debris to be cleared. Blow the debris into a
convenient heap, then use the vacuum function to collect the debris.
10.8 Working with the vacuum
Inspect the area to be worked before starting. Remove any objects or debris that could jam or
become entangled in the cordless leaf blower. Select the vacuum function using the selector
lever (8) on the side of the machine and switch the machine on.
With the cordless leaf blower resting on its wheels move the cordless leaf blower forwards
directing the nozzle at the debris to be collected.
Alternatively, with the cordless leaf blower held just above the ground swing the machine from
side to side, moving forwards and directing the nozzle at the debris to be collected.
Note: Do not force the nozzle into the debris as this will block the suction
tube and reduce the efficiency of the machine.
Organic materials such as leaves contain a large amount of water that can
cause them to stick to the inside of the suction tube.
To reduce sticking the material should be left for a few days to dry out.
▪ When using the Vacuum Blower in suction mode the debris is sucked up the suction tube
before being ejected into the collection bag (9).
▪ The suction fan is equipped with a knife, increasing the shredding capacity significantly.
▪ As the debris passes through the suction fan, it will be shredded.
▪ The shredded organic debris is ideal to use as mulch around plants.
10.9 Emptying the collection bag
Empty the collection bag (9), when it is approx. Half full. This way the suction capacity is
maintained efficiently.
▪ Switch the appliance off and remove the battery (13).
▪ Open the zipper at the base of the collection bag and empty it.
▪ Reclose the sipper completely.
11 CLEANING AND MAINTENANCE
11.1 Cleaning
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
▪ Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
11.2 Maintenance
▪ Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
