POWDP25400 EN
Copyright © 2021 VARO P a g e | 9 www.varo.com
▪ Do not open the charger.
▪ Do not probe the charger.
▪ The charger is intended for indoor use only.
10 FUNCTIONS
10.1 Soft grip (1)
Your mini plunge saw is equipped with TPR soft grip and protective parts. TPR (Thermoplastic
rubber) is elastic, chock absorbing and environmental friendly (recyclable).
10.2 Li-ion battery (10)
Advantages of Li-ion batteries:
▪ Li-ion batteries have a higher capacity/weight ratio (more power for less heavy, more
compact, battery).
▪ No memory effect (capacity loss after several charge/discharge cycles) like other type
batteries. (Ni-Cd, Ni-MeH,...).
▪ Limited self-discharge (also see chapter: Storage).
10.3 Dust extraction outlet (9)
The saw includes a dust extraction outlet that can be attached with a dust extraction hose (12)
for dust removal. This adapter port can be attached to a vacuum cleaner (not included). Hook
up a vacuum cleaner and keep your workspace free of dust and debris while you work.
11 BEFORE USE
11.1 Charging the battery pack
The battery pack for this tool is supplied in a low charge condition to prevent possible
problems; therefore, you have to charge the battery before first use.
Note: Batteries will not reach full charge the first time they are charged.
Allow several cycles for the item to fully charge. The battery should only be
charged indoors.
After normal use, about 1 hour of charging time is required for the battery to be fully charged.
The battery pack will become slightly warm while charging; this is normal and does not
indicate a problem.
Do not place the charger in an area of extreme heat or cold. Best is at normal room
temperature. When the battery becomes fully charged, unplug your charger from the power
supply and remove the battery pack from the charger.
Note:
▪ Allow the battery pack to cool completely before charging
▪ Inspect the battery pack before charging; do not charge a cracked or leaking battery pack.
11.1.1 Charging indication (Fig. 1)
Connect the charger to the power outlet socket:
▪ Solid green: ready to charge.
▪ Flickering red: charging.
▪ Solid green: charged.
