644863
7
Zoom out
Zoom in
Previous page
1/10
Next page
POWC1060 EN
Copyright © 2017 VARO P a g e | 7 www.varo.com
Insert the drill or screw bit in the chuck.
Close the chuck by firmly tightening the front collar (a) while holding the rear part (b) of the
chuck with the other hand.
In order to remove the drill or screw bit proceed in reverse order. Before positioning or
removing a drill or screw bit always remove the battery from the machine.
8.3 Forward/reverse switch
Push the forward/reverse switch (2) from right to left side to drill holes and fasten screws.
Push the forward/reverse switch (2) from left to right side to loosen screws. Always wait
until the motor has come to a complete standstill before changing the direction of rotation.
8.4 Adjusting the torque
This machine has been fitted with an adjustable coupling (17+1 pos) to limit the torque when
tightening screws .
Turn the adjustment collar (3) clockwise to reduce the torque and counterclockwise to
increase the torque. The correct setting depends on the type and size of the screw and the
work piece.
In case of doubt, start with the lowest setting and increase the torque until you have
reached the desired result.
For drilling, turn the adjustment collar fully counterclockwise (to the drilling symbol).
8.5 Switching on and off
To switch on the machine, press the on/off switch (1).
To switch off the machine, release the on/off switch.
8.6 Variable speed
Applying more pressure to the On/Off switch will increase the speed.
Applying less pressure to the On/Off switch will decrease the speed.
8.7 Lower/higher speed selecting
Lower speed: switch Speed convert button to position “1”
Higher speed: switch Speed convert button to position “2”
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10 TECHNICAL DATA
Model
Voltage / frequency charging unit
Rated Voltage
Rotation speed
Torque positions
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POWC1060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POWC1060 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POWC1060

Powerplus POWC1060 User Manual - German - 11 pages

Powerplus POWC1060 User Manual - Dutch - 11 pages

Powerplus POWC1060 User Manual - French - 10 pages

Powerplus POWC1060 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info