POWAIR0010 EN
Copyright © 2018 VARO P a g e | 5 www.varo.com
9 MAINTENANCE
WARNING: Disconnect wrench from air supply before changing
accessories, servicing or performing maintenance. Replace or repair
damaged parts. Use genuine parts only. Non-authorised parts may be
dangerous.
1. Lubricate the air wrench daily with a few drops of air tool oil dripped into the air inlet
2. DO NOT use worn or damaged sockets.
3. Loss of power or erratic action may be due to the following:
4. Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size
or type of hose connectors. To remedy check the air supply and follow instructions.
5. Grit or gum deposits in the wrench may also reduce performance. If your model has
an air strainer (located in the area of the air inlet), remove the strainer and clean it.
6. When not in use, disconnect from air supply, clean wrench and store in a safe, dry,
childproof location.
10 TECHNICAL DATA
12 TROUBLESHOOTING
The following form lists the common operating system with problem and solutions. Please
read the form carefully and follow it.
WARNING: If any of the following symptoms appears during your operating,
stop using the tool immediately, or serious personal injury could result.
Only a qualified persons or an authorized service center can perform
repairs or replacement of tool.