582177
5
Zoom out
Zoom in
Previous page
1/11
Next page
POW902 EN
Copyright © 2014 VARO NV P a g e | 5 www.varo.com
Please consider environmental influences. Ensure good illumination for your workspace.
Do not use the device in potential fire hazard, easily flammable fluids or explosive
surroundings, do not expose it to unnecessary weather influences, such as rain, damp,
sun exposure, dust or cold.
Protect yourself from electrical shock.
Keep this device away from unauthorized persons.
Store the cable hoist in a proper manner when it is not in use. Store the machine at a dry,
high or lockable place, out of the reach of children.
Do not overload the cable hoist, in any case! Please do not exceed the maximum load
capacity (see data plate, not load hook!). Do not use 2 or more machines to load same
object.
Forbid to lift an attached/fixed object.
Don't use the machine in aggressive environments or under low temperatures.
Wear safety clothes. Never wear loose clothing or jewellery; this could be caught by
movable parts of the machine. Safety equipment (such as rubber gloves, non-slip
footwear, hearing and hair protection and etc.) is recommended when working.
Only use the power cord (17) for its intended use. Never carry the tool or pull on the power
cord (17) and never pull on the cord to disconnect the power plug from the power outlet.
Keep the power cord (17) away from heat, oil and sharp edges. Check the power cord (17)
before every use for damages. Never use the cable hoist, if the cord is worn out, knotted
itself, or has a kink. Allow the cord to be replaced by a qualified professional.
Please be sure to maintain upright body position. Ensure a safe position and always
maintain your balance, and not at an extreme angle.
Disconnect the cable hoist from the power network when not in use and prior to
performing any maintenance.
Always work carefully and with a due amount of caution.
Use only the manufacturer recommended accessories.
Have your cable hoist repaired only by a qualified electrician. This power tool complies
with applicable safety regulations.
Be sure to hoist the loads with lowest speed from the ground. And the cable should be
tense but not unwound when start loading from the ground.
The micro switch is not allowed to be used as an off-switch or be dismantled. The micro
switch is a safety device to prevent that the weight is lifted over the boundary.
If the brakes stop functioning and the load lowers quickly, one should press the off-switch
immediately and then the On-switch. After unloading, please send the machine in for
repairs to a qualified professional.
Do not leave the load hanging in the air long-term, to prevent the deformation of the
pieces. While the machine is in operation do not carry out any repairs or inspections.
It is prohibited to change any part of the pulley or to disassemble it.
Depending on the frequency of use, after 20 hours of total operation or at least once a
year, the machine must be taken in for a thorough maintenance.
Make sure to operate the emergency switch (15) to stop the machine in case of dangerous
and emergent situation. Reset the emergency switch (15) head to operation status in the
direction of the arrow (clockwise) until the danger has passed.
7 BEFORE EVERY USE
Attention! The cable hoist is designed only for domestic use! It is not
intended for professional applications. This device can be operated without
hazards only if you read this user manual and safety instructions and
closely follow all instructions.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW902 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW902 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW902

Powerplus POW902 User Manual - German - 13 pages

Powerplus POW902 User Manual - Dutch - 12 pages

Powerplus POW902 User Manual - French - 13 pages

Powerplus POW902 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info