582041
10
Zoom out
Zoom in
Previous page
1/15
Next page
POW6128 EN
Copyright © 2014 VARO P a g e | 10 www.varo.com
NOTE: When shaping it is advisable to achieve a trapezoidal shape (Fig. 11).
This is where the bottom is wider than the top. A trapezoidal cut corresponds
to the natural growth of plants and results in optimal hedge growth, as it will
expose more light to the bottom of the hedge.
9 AFTER USE
Switch the product off, allow the engine to cool down and then remove the spark plug
connector.
Check, clean and store the product as described below.
9.1 The golden rules for care
WARNING! Always switch the product off, let the product cool down and
disconnect the spark plug connector before performing inspection,
maintenance and cleaning work!
Keep the product clean and free from debris after each use and before storage.
Regular and correct cleaning of this product will help ensure safe use and prolong the life
of the product.
Inspect the product before each use for worn and damaged parts. Do not operate it if any
parts are broken or show signs of wear.
Ensure the air vents remain clear from obstruction at all times.
WARNING! Only perform repairs and maintenance work according to these
instructions! All further works must be performed by a qualified specialist!
9.2 General cleaning
Clean the product with a dry cloth; use a soft brush for hard to reach areas.
Pay particular attention to the air vents (5) and to the cutting blade.
Remove stubborn dirt with high pressure air (max. 3 bar).
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be harmful to
its surfaces.
9.2.1 Care and maintenance
Check for worn or damaged parts. Replace worn parts as necessary or contact an
authorized service center before using the product again.
9.2.2 Cutting blade
WARNING! Wear safety gloves when working on the cutting blade and close
to it! Use appropriate tools to remove debris e.g. a brush or wooden stick!
Never use your bare hands!
Keep the cutting blade (1) clean and free of debris. Remove trimmings.
Keep the cutting blade (1) sharp to retain a good cutting performance. Replace a worn or
damaged cutting blade with a new one of the same type.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW6128 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW6128 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW6128

Powerplus POW6128 User Manual - German - 16 pages

Powerplus POW6128 User Manual - Dutch - 16 pages

Powerplus POW6128 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info