480881
9
Zoom out
Zoom in
Previous page
1/14
Next page
POW60476 EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
9.8.1 Cutting string extension
Your unit is equipped with an automatic tapping dual string mechanism, i.e. both strings will
become extended when you tap the ground with the cutting attachment. If the strings are
initially longer than the given cutting diameter, the line cutting blade will automatically adjust
their length. Attention! Regularly remove dirt from the line cutting blade. Otherwise, its cutting
effect will be limited.
In case of a decreasing cutting performance:
Start the engine and hold the unit above grass. Hit the ground with the cutting attachment. The
string will extend itself automatically.
In case it becomes impossible to extend the string:
Turn the unit off
Properly insert the spindle and strongly pull the string end.
In case you do not see the string tips:
Change the string spindle.
9.9 Work with the metal cutting blade
Attention! During your work always wear the belt and suitable work clothes. Make sure the
cutting blade is properly mounted. Damaged and blunted unit components must be replaced.
There is a risk of injury.
Use the cutting blade on free and flat surfaces. Carefully check all the areas to be treated
and remove all the foreign objects. Avoid any contact with stones, metal or other
obstacles. The metal cutting disk could become damaged and there is also a risk of
kicking.
During your work, hold the cutting attachment close above the ground and move the unit
like a regular scythe from side to side.
Do not hold the cutting attachment under any angle and do not lift it above the ground.
Do not use the unit for the cutting of shrubs, brushwood or underwood.
Regularly check the metal cutting blade's condition and change damaged cutting blades.
10 CLEANING AND MAINTENANCE
ATTENTION! Let any repair and maintenance work not described in these
instructions be carried out by a professional service shop. Only use
original replacement parts. Any maintenance and cleaning tasks should
only be carried out when the motor is switched off and the ignition
disconnected. Risk of injury! Let the machine cool down before undertaking
any maintenance or cleaning tasks. Parts of the motor are hot. There is a
risk of getting burned!
This tool corresponds to the relevant safety provisions.
Repairs, service and maintenance must be carried out exclusively by authorized service
workshops/trained professionals.
Only original spare parts may be used for repairs; otherwise there is a risk of injury for the
operator.
10.1 Unit cleaning
Subject your unit to regular cleaning and care. It will deliver good performance for a very long
time.
After every operation clean the cutting attachment of grass and soil.
Clean the unit with a soft brush or a rug.
The unit must not be sprayed with water or submerged into water.
Do not use any detergents or cleaning solutions. The unit could be damaged. Chemical
substances could negatively affect the unit's plastic components.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW60476 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW60476 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW60476

Powerplus POW60476 User Manual - German - 15 pages

Powerplus POW60476 User Manual - Dutch - 15 pages

Powerplus POW60476 User Manual - French - 15 pages

Powerplus POW60476 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info