480966
4
Zoom out
Zoom in
Previous page
1/8
Next page
POW30540
Copyright © 2013 VARO Page | 4
5.4 Power tool use and care
§
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be
safer if used in the context
for which it was designed.
§
Do not use the power tool if the switch cannot turn it on and off. A power tool with a
broken switch is dangerous and must be repaired.
§ Disconnect the plug from the power source before making adjustm
ents, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
§
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with
the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
§
Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation o
tool must be repaired. Many accidents are caused by using poorly maintained power
tools.
§
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
§
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to
be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
§
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 MACHINE-SPECIFIC SAFETY WARNINGS
§ Use appropriate detectors to determine if
utility lines are hidden in the work area or
the local utility company for assistance.
§ Switch off the power tool immediately when the tool insert jams. Be
prepared for high
reaction torque that can cause kickback.
§ Hold power tool by the insulated gripping
surfaces, when performing an operation
the cutting tool may run into hidden wiring.
§ When working with the machine, always hold it firmly with both h
ands and provide
secure stance.
§ Secure the work piece.
§ Keep your workplace clean.
§ Always wait until the machine has come to a
complete stop before placing it down.
§ Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as
transport and storage, set the rotational direction
switch to the centre position.
7 FEATURES
7.1 Keyless chuck
Your drill has a keyless chuck that allows you to hand tighten or release drill bit in the chuck
jaws.
The SDS-Plus tool holder allows for si
mple and convenient changing of
drilling tools without the use of additional tools.
EN
www.varo.com
Do not expect the power tool to do more than it can. Use the correct power tool for what
safer if used in the context
Do not use the power tool if the switch cannot turn it on and off. A power tool with a
ents, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
Store power tools, when not in use, out of the reach of children and do not allow people
the power tool or these instructions to operate it. Power tools are
Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
f the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
Your power tool should be serviced by a qualified specialist using only standard spare
utility lines are hidden in the work area or
call
prepared for high
surfaces, when performing an operation
where
ands and provide
for a
complete stop before placing it down.
tool change, etc.) as well as
during
switch to the centre position.
Your drill has a keyless chuck that allows you to hand tighten or release drill bit in the chuck
mple and convenient changing of
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus POW30540 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus POW30540 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus POW30540

Powerplus POW30540 User Manual - German - 10 pages

Powerplus POW30540 User Manual - Dutch - 9 pages

Powerplus POW30540 User Manual - French - 9 pages

Powerplus POW30540 Additional guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info