391294
9
Zoom out
Zoom in
Previous page
1/12
Next page
POWXQ5104 EN
Copyright © 2012 VARO NV P a g e | 9 www.varo.com
When the disc becomes jammed, for any reason, switch off the machine
immediately to prevent damage to the motor.
9 USE
9.1 Working direction (fig 8)
The machine must always work opposite to the direction of rotation. Therefore, never
move the machine in the other direction! Otherwise, the danger exists of it being pushed
uncontrolled out of the cut.
9.2 (Rough) grinding (fig 9)
For the best (rough)grinding results, hold the grinding wheel at an angle of between 30°
and
40° to the workpiece surface and guide back and forth over the workpiece in steady
movements.
Never use a cutting disc for grinding/roughing!
9.3 Cutting
When you use the right-angle grinder for cutting purposes, avoid tilting it in the cutting plane.
The cutting wheel must have a clean cutting edge.
A diamond cutting wheel is best used to cut hard stone.
It is prohibited to use the machine on asbestos materials!
Never use a grinding disc for cutting!
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power plug.
10.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2 Lubrication
The machine does not need any extra lubrication.
10.3 Carbon brushes
When excessive sparking occurs, or when the machine does not start or does not run
smoothly, please check the carbon brushes and replace them if necessary.(see above).
10.4 mains cable & plug
If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the
connecting cable should only be carried out by a qualified specialist (qualified electrician).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus pow xq5104 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus pow xq5104 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus pow xq5104

Powerplus pow xq5104 User Manual - German - 13 pages

Powerplus pow xq5104 User Manual - Dutch - 13 pages

Powerplus pow xq5104 User Manual - French - 13 pages

Powerplus pow xq5104 Additional guide - All languages - 3 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info