389044
8
Zoom out
Zoom in
Previous page
1/12
Next page
POW X0153, 0155 & 0157
EN
Copyright © 2011 VARO
P a g e | 8
www.varo.com
8.2 Install/remove battery pack.
8.2.1 To install battery pack on your cordless drill
Lock the switch trigger (4) on the drill by placing the forward/reverse) selector in its centre
position. Place the battery pack in the drill. Align the raised rib on battery pack with the groove
inside the drill. (Make sure the latches on each side of your battery pack snap in place and
battery pack is secured in the drill before beginning operation.)
8.2.2 To remove battery pack
Lock the switch trigger on the drill by placing the forward/reverse) selector in its centre position.
Locate latches (9) on the side of the battery pack and depress them to release the battery
pack from the drill.
The battery pack will automatically disconnect in the direction it should be removed in.
Remove the battery pack from you drill.
8.3 Installing/removing bits
8.3.1 Installing bits
Lock the switch trigger by placing the direction of rotation selector in centre position.
Open or close chuck jaws to a point where the opening is slightly larger than the bit size you
intend to use. Also, raise the front of the drill slightly to keep the bit from falling out of the
chuck jaws. Insert drill bit straight into chuck the full length of the jaws as shown in. Tighten
the chuck jaws on the drill bit.
Note: Rotate the chuck body in the direction of the arrow marked GRIP to tighten chuck jaws.
Do not use a wrench to tighten or loosen the chuck jaws.
WARNING:
Make sure to insert drill bit straight into chuck jaws.
Do not insert drill bit into chuck jaws at an angle, this could cause drill bit to be thrown from drill
resulting in possible serious personal injury or damage to the chuck.
8.3.2 Removing bits
Lock the switch trigger by placing rotation selector in centre position.
Loosen the chuck jaws from the drill bit.
Note: Rotate chuck body in the direction of the arrow marked RELEASE to loosen chuck jaws.
Do not use a wrench to tighten or loosen the chuck jaws.
Remove the drill bit from the chuck jaws.
8.4 Adjustable torque clutch
This drill is equipped with an adjustable torque clutch for driving different types of screws into
different materials. The proper setting depends on the type of material and the size of screw
you are using.
TO ADJUST TORQUE: Identify the 24 (25) torque indicator settings located on the front of the
drill.
Rotate adjusting ring (2) to the desired setting.
1-5 For driving small screws
6-10 For driving screws into soft material
11-15 For driving screws into soft and hard materials
16-20 For driving screws in hard wood
21-22+1(X0157)
21-23+1 (X0153&X0155)
(
)
For heavy drilling
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerplus pow x 0157 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerplus pow x 0157 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Powerplus pow x 0157

Powerplus pow x 0157 User Manual - German - 13 pages

Powerplus pow x 0157 User Manual - Dutch - 13 pages

Powerplus pow x 0157 User Manual - French - 13 pages

Powerplus pow x 0157 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info