Manual Powerpeak Trendy Line FET6702 manueel (page 23 of 53) (English, German, Dutch, French)

613975

Zoom out

Zoom in

1/53

MAINTENANCE AND USE

 This device requires a regular check-up to prevent physical injury. This means that bolts and nuts should be

frequently checked for cracks and sharp edges etc.

 Defective components must be replaced immediately. If this is not possible, the device must be put out of

order until the necessary repairs have been made.

 Clean only with a damp cloth, do not use solvent cleaners.

 This product is intended for use in clean, dry conditions. You should avoid storage in excessively cold or damp

places as this may lead to corrosion and other related problems.

COMPUTER

Turn computer on and off

The monitor uses two 1.5V “AA” batteries. This system turns on when any key is pressed or when it receives an

signal input from the speed sensor.

If the computer does not receive a signal for more than 4 minutes, the computer will automatically switch to

sleeping mode. Press a key or move the pedals to start the computer.

Attention: If there is an improper display on the monitor, please replace the batteries. Please take care to remove

all batteries at the same time.

Reset

To computer can be reset by either changing the battery or pressing the mode key for 3 seconds.

Mode key

Press the MODE key to choose SCAN or LOCK. If you do not want the scan mode, press the MODE key if the

function you want starts to blink. On overview of the functions is shown below.

Select function

TIME: Press the MODE key until the pointer locks on to time. The total working time will be shown after the

exercise is started.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerpeak Trendy Line FET6702 manueel in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerpeak Trendy Line FET6702 manueel Manual

Product: