613976
24
Zoom out
Zoom in
Previous page
1/72
Next page
24
Longwoods Ltd._04_2013
Attach the plastic covers (11 L+R) to the lower swing bars (13 L+R) with the self-tapping screws M4*15
(7).
Attach the plastic cover (73) to the handlebar post (72) with the self-tapping screws M4*15 (7).
Attach the handlebar (85) with two coated Allen bolts M8*20 (10) and two curved washers (5). Do
not tighten the bolts fully.
Step 6: Computer assembly
Remove the four pre-mounted screws (79) at the rear side of the computer (1).
Connect the upper computer cable (82) with the computer (1).
Next, mount the computer (1) on the bracket of the handlebar with the four removed screws (79).
Attach the hand pulse cable (80) in the hole at the rear side of the computer (1).
Step 7:
Make sure all parts are attached correctly and fully tighten all bolts, nuts and screws.
MAINTENANCE AND USE
This device requires a regular check-up to prevent physical injury. This means that bolts and nuts
should be frequently checked for cracks and sharp edges etc.
Defective components must be replaced immediately. If this is not possible, the device must be
put out of order until the necessary repairs have been made.
Clean only with a damp cloth, do not use solvent cleaners.
This product is intended for use in clean, dry conditions. You should avoid storage in excessively
cold or damp places as this may lead to corrosion and other related problems.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Powerpeak Slim Line FET8315P manueel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Powerpeak Slim Line FET8315P manueel in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info