Manual Powerfix HG01701C - IAN 278296 (page 10 of 86) (English, German)

809508

Zoom out

Zoom in

1/86

10 GB

Inserting / changing

the battery

If the battery symbol appears in the display

the inserted battery is almost drained and must be

replaced. Empty batteries can falsify the measured

result.

To insert the battery proceed as follows:

Open the battery compartment cover on the

back of the device. You can remove the used

battery more easily with the aid of the material

strip, which is inside the battery compartment

6. Just pull on the material strip.

Remove the used battery.

Plug the contacts of the 9 V-blockbattery on

the contacts of the proﬁled plug. Make sure

you ﬁt the batteries the right way round. This

is speciﬁed by the proﬁled shape of the con-

tacts. Also ensure without fail that the material

strip is underneath the battery.

Insert the battery in the battery compartment

and close the cover again, so that it audibly

latches into place.

Start-up

Before you take a

measurement

Ensure that both measuring pins 2 touch the

surface of the material at the same time.

Increase the pressure on the measuring pins

for rough surfaces if necessary.

For delicate surfaces complete the measure-

ment on a section that is not in the visible

area.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerfix HG01701C - IAN 278296 in the language / languages: English, German as an attachment in your email.

The manual is 0.76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerfix HG01701C - IAN 278296 Manual

Product: