Manual Powerfix HG01701C - IAN 278296 (page 8 of 86) (English, German)

809508

Zoom out

Zoom in

1/86

MOISTURE METER

IAN 278296

PRÍSTROJ NA MERANIE VLHKOSTI V

STAVBÁCH A DREVE

Pokyny pre obsluhu a bezpečnostné pokyny

BAU- UND HOLZFEUCHTEMESSGERÄT

Bedienungs- und Sicherheitshinweise

MERILNIK VLAGE V LESU

IN ZGRADBAH

Navodila za upravljanje in varnostna opozorila

MĚŘIČ VLHKOSTI DŘEVA A

STAVEBNÍCH MATERIÁLŮ

Pokyny pro obsluhu a bezpečnostní pokyny

MOISTURE METER

Operation and Safety Notes

ANYAGNEDVESSÉGMÉRŐ

Kezelési és biztonsági utalások

GB Operation and Safety Notes Page 5

HU Kezelési és biztonsági utalások Oldal 18

SI Navodila za upravljanje in

varnostna opozorila Stran 31

CZ Pokyny pro obsluhu a

bezpečnostní pokyny Strana 46

SK Pokyny pre obsluhu a

bezpečnostné pokyny Strana 59

DE / AT / CH Bedienungs- und Sicherheitshinweise Seite 72

12 11 10

5 GB

Introduction .....................................Page 6

Intended use ..........................................Page 6

Parts description ....................................Page 6

Technical Data ......................................Page 7

Scope of delivery ..................................Page 7

General safety

instructions .......................................Page 7

Battery safety information .....................Page 8

Before using ....................................Page 9

Inserting /

changing the battery ...............Page 10

Start-up ...............................................Page 10

Before you take a measurement ..........Page 10

Taking a measurement ..........................Page 11

Battery display.......................................Page 13

Temperature display .............................Page 13

Troubleshooting ..........................Page 14

Cleaning and Care .....................Page 14

Storage ...............................................Page 15

Disposal ..............................................Page 15

Warranty ...........................................Page 16

6 GB

Moisture Meter

Introduction

We congratulate you on the purchase of your

new product. You have chosen a high quality

product. The instructions for use are part of the

product. They contain important information con-

cerning safety, use and disposal. Before using the

product, please familiarise yourself with all of the

safety information and instructions for use. Only

use the unit as described and for the speciﬁed ap-

plications. If you pass the product on to anyone

else, please ensure that you also pass on all the

documentation with it.

Intended use

This device is suitable for measuring wood and

building moisture, for example in ﬁrewood, paper,

cardboard, mortar, concrete or plaster. The device

is only intended for use in private households, and

not intended for commercial use.

Parts description

1 Protective cap

2 Measuring pins

3 MODE button (Material selection)

4 button (displays measurement on screen,

°C or °F pre-selected)

5 button (ON/OFF)

6 Battery compartment

7 Display

7 GB

8 Moisture indicator in %

9 Material number

10 Battery indicator

11 Lock symbol (Measured value frozen)

12 Temperature display (°C or °F)

Technical Data

Operating voltage: 9 V , 15 mA

Battery type: 6F22/6LR61

(9 V block battery)

Precision: see chapter ‚Making

measurements‘

Operating temperature: 0 °C to 40 °C

Protection class: IP 20

Resolution: 0.1%

Air humidity: up to a maximum of

80% (relative)

Scope of delivery

Immediately after unpacking please check the

package contents for completeness and if all parts

and the product are in good condition.

1 Moisture Meter

1 9 V-blockbattery

1 Instructions for use

General safety instructions

Before using the product, please familiarise your-

self with all the operating and safety instructions.

8 GB

Please include all documentation when passing

this product on to others.

Check the device for damage before use. If the

device is damaged do not use it.

Do not expose the device to moisture. Other-

wise the device could be damaged.

his device may be used by children age 8 ye

ars

and up, as well as by persons with reduced

physical, sensory or mental capacities, or

lacking experience and / or knowledge, so

long as they are supervised or instructed in

the safe use of the device and understand the

associated risks. Children should not be al-

lowed to play with the device. Cleaning and

user maintenance should not be performed

by children without supervision.

The measuring pins are very

sharp. Always be careful when using this de-

vice. Always attach the protective cap to the

device when not in use. Otherwise there is a

risk of injury!

Battery safety

information

DANGER TO LIFE! Batteries

are not intended for children. If accidentally

swallowed seek immediate medical attention.

CAUTION!

EXPLOSION HAZARD!

Never recharge non-rechargeable batteries and

do not short-circuit and / or open any batteries.

Never throw batteries into ﬁre or water.

Do not exert mechanical loads to batteries.

9 GB

Risk of battery leakage

In the event the batteries leak, remove them

from the device immediately to prevent damage.

Do not let the ﬂuid from a leaking battery come

into contact with your skin, eyes or mucous

membranes. In the event of contact with bat-

tery acid, thoroughly ﬂush the aﬀected area

with clean water and seek immediate medical

attention.

Use only the recommended battery type. Do

not use old and new batteries together.

Avoid extreme environmental conditions and

temperatures, which could aﬀect batteries,

e.g. above radiators / in direct sunlight.

Remove the batteries from the device if they

have not been used for a long period.

Risk of property damage

Only use the speciﬁed battery type!

When inserting the battery ensure the correct

polarity! This is shown in the battery compart-

ment.

If necessary, clean the battery and device con-

tacts before inserting the battery.

Promptly remove used batteries from the product.

Before using

Before initial use, remove the protective ﬁlm

from the device display

7 and insert the

enclosed battery.

10 GB

Inserting / changing

the battery

If the battery symbol appears in the display

the inserted battery is almost drained and must be

replaced. Empty batteries can falsify the measured

result.

To insert the battery proceed as follows:

Open the battery compartment cover on the

back of the device. You can remove the used

battery more easily with the aid of the material

strip, which is inside the battery compartment

6. Just pull on the material strip.

Remove the used battery.

Plug the contacts of the 9 V-blockbattery on

the contacts of the proﬁled plug. Make sure

you ﬁt the batteries the right way round. This

is speciﬁed by the proﬁled shape of the con-

tacts. Also ensure without fail that the material

strip is underneath the battery.

Insert the battery in the battery compartment

and close the cover again, so that it audibly

latches into place.

Start-up

Before you take a

measurement

Ensure that both measuring pins 2 touch the

surface of the material at the same time.

Increase the pressure on the measuring pins

for rough surfaces if necessary.

For delicate surfaces complete the measure-

ment on a section that is not in the visible

area.

12 GB

Wood moisture approximate value

for firewood

O 6–15 ideal for heating –

high heating value

O 16–20 restricted heating –

low heating value

X 21–44

not suitable for hea-

ting – further drying

necessary

Reference values for humidity

expressed in per cent by weight

Num-

ber Material Measuring

range dry borderline too humid

1birch, beech, cherry,

larch, nut tree 6–44 % < 12 % 12–15 % > 15 %

1oak, pine, maple,

ash, Douglas ﬁr 6–44 % < 15 % 15–20 % > 20 %

2Cement screed, con-

crete, plaster 1.4–7.4 % < 2 % 2–4 % > 4 %

3Anhydride screed 0.0–4.1 % < 0.5 % 0.5–1 % > 1 %

4Cement mortar 0.8–5.1 % < 2 % 2–5 % > 5 %

5Lime mortar 0.4–3.7 % < 2 % 2–3.5 % > 3.5 %

6Brick 0.0–8.5 % < 1 % 1–3 % > 3 %

14 GB

Troubleshooting

Error Possible causes and

solutions

The measure-

ment is obvi-

ously too high

or low.

Check whether the device is

set to the correct material.

Check if the measuring pins 2

are correctly pressed against

the material.

Repeat the measurement process.

The display

is reading

'Lo' or 'Hi'.

The measurement range has

been exceeded or you have

not reached the measuring

range.

The number

on the display

is not reacting.

Is the lock key on the display?

Press the button 4.

You can

barely see the

number on the

display.

The battery is low.

See the chapter 'Inserting/

changing the battery'.

Electrostatic discharges can lead to malfunctions.

In the event of such malfunctions, remove the

batteries brieﬂy and reinsert them.

Cleaning and Care

Do not allow liquids to enter the device. Oth-

erwise the product may be damaged.

Only clean the device with a slightly damp-

ened cloth and mild washing-up liquid.

Clean the measuring pins with a slightly

dampened cloth and dry it afterwards.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Powerfix HG01701C - IAN 278296 in the language / languages: English, German as an attachment in your email.

The manual is 0.76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Powerfix HG01701C - IAN 278296 Manual

Product: