Manual Power Plate Pro 7 (page 2 of 14) (English)

703787

Zoom out

Zoom in

1/14

Introduction

Power Plate

machines use the

principles of Acceleration Training™

exercise to stimulate the body’s natural

response to vibration. Power Plate

machines create vibrations that cause

instability throughout the body. As these

vibrations transmit waves of energy,

a variety of muscles subconsciously

contract throughout the body. This

rapid cycle of muscle contraction and

release is what makes training with

Power Plate equipment so effective.

Acceleration Training was discovered in

the former Soviet Union, where it was

found to effectively combat the negative

effects of the zero-gravity environment

in space. Cosmonauts were faced with

considerable loss of muscle strength and

bone density from their time in space,

and Acceleration Training exercise

helped reverse these effects. However,

this new form of training was unknown in

Western Europe until after the fall of the

Iron Curtain, when Dutch sports expert

Guus van der Meer introduced the

technology, resulting in the development

of the rst Power Plate model in 1999.

Since then, Power Plate technology

has been adapted for the masses so it

is now possible for everyone to enjoy

training on Power Plate machines. That

means you can strength train without

the need to add extra weights, thus

without overloading the body and its

joints. Power Plate machines are used by

everyone from high performance athletes

to the elderly, and anyone wishing

to improve their general health and

tness levels.

Correct Use is Essential for

Optimal Results

In theory, the Power Plate machine

can be used by almost everyone.

You can adjust training to your own

level and reduce any burden on your

joints, tendons and ligaments. As with

every form of training, the correct use

of exercises, adjusted to your personal

abilities, will determine the benets and

effects of completing a training session

on the Power Plate machine, while at

the same time reducing the risk of injury

or damage to the body.

Body posture, muscle stiffness and

muscle tension (i.e. how contracted your

muscle is) are important contributing

factors in your training session. If

muscles are tensed, or contracted,

they will absorb vibrations to help

strengthen and tone those muscles.

Passive exercises, such as stretch and

massage on the Power Plate machine,

don’t absorb as much vibration and

can therefore be performed on a more

frequent basis.

Acceleration Training exercise should

be used on a regular basis, starting

with low intensity, which means low

frequency and amplitude settings for

short sessions. The body should be

gently stimulated in a way that will allow

you to adjust to vibration training, but will

not overload your body. Over time, the

intensity and duration can be increased

in the same manner as other progressive

training programs. Once the body has

adapted to vibration, the training can be

changed or intensied to keep improving

performance, whether this improvement

is desired for sports or daily life goals.

Contents

AIRdaptive, pro5 HP, my 7, my5, my 3 proMOTION powerBIKE and Acceleration Training are registered

trademarks and/or trademarks of Power Plate International Ltd., Power Plate North America, Inc. and/or

their afliates. All other trademarks are the property of their respective owners. Power Plate

machines

are protected under patents and design rights in numerous countries around the world. Power Plate

retains all rights (including copyright, trademark and all other intellectual property rights) in relation to

all information provided in this manual. You may not copy, publish or distribute any of the information

contained in this manual, or in any other documents published by Power Plate, without the prior written

consent of Power Plate.

Introduction 01

Correct Use is Essential for Optimal Results 01

Medical Indications 02

Important Safety Instructions 04

Health Warnings 04

Setup and Handling 04

Hydration 05

Clothing and Padding 05

Position and Balance 05

EMC Precautions 06

Operating the Power Plate

pro7™ Machine 08

proMOTION

™

Dynamic Vibration Technology 08

How Does it Work? 08

Usage and Guidelines 08

Varying the Intensity 09

Exercise Time, Number of Exercises and Rest Time 09

Frequency 10

Amplitude 10

Mat 10

Sessions per Week 10

Extra Load 10

Technical Specications 11

Maintenance 12

Troubleshooting 12

FMC Declaration 14

Symbol Descriptions 17

Appendix 19

Touchscreen Controls 20

Parameters 22

Contact and Support 24

Warranty 24

One of my line cords won't retract on the platform ? Submitted on 15-11-2022 at 20:12
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Power Plate Pro 7 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Power Plate Pro 7 Manual

Product: