628495
100
Zoom out
Zoom in
Previous page
1/105
Next page
Query phone output gain.
, where x is the new value of the phone output gain.
If this command was issued after the example
above, then the status message would be .
8.127. SGGAIN -- Set Gain of Signal Generator
This command sets the gain of the internal signal generator. The value of SGGAIN specifies the gain in dB
applied to signal generator. A gain of 0 dB produces a signal at nominal level (-20 dB full scale).
This command is an integer command. See
Section 6.2 for more information on this type of command. The
minimum and maximum values for this command are -100 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01SGGAIN6
Set signal generator gain to 6 dB.
F01SGGAIN6
F01SGGAIN>3
Increase signal generator gain by 3 dB.
F01SGGAINx , where x is the new value of the signal
generator gain. If this command was issued after the
example above, then the status message would be
F01SGGAIN9 .
F01SGGAIN?
Query signal generator gain.
F01SGGAINx , where x is the new value of the signal
generator gain. If this command was issued after the
example above, then the status message would be
F01SGGAIN9 .
8.128. SGMUTE -- Mute Signal Generator
This command controls the muting of the signal generator.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01SGMUTE1
Mute signal generator.
F01SGMUTE1
F01SGMUTE0
Unmute signal generator.
F01SGMUTE0
F01SGMUTE2
Toggle mute on signal generator.
F01SGMUTEx , where x is 0 or 1 depending on the current
state of the signal generator mute.
F01SGMUTE?
Query signal generator mute.
F01SGMUTEx , where x is 0 or 1 depending on the current
state of the signal generator mute.
8.129. SGTYPE -- Set Type of Signal Produced by Signal
Generator
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info