628495
82
Zoom out
Zoom in
Previous page
1/105
Next page
Example Description Status Message
F01MUTEO41
Mute output 4 .
F01MUTEO41
F01MUTEOA0
Unmute output A .
F01MUTEOA0
F01MUTEO72
Toggle mute status of
output 7 .
F01MUTEO7x , where x is either 0 or 1 depending on
the current mute status of the output.
F01MUTEOC?
Query mute status of
output C .
F01MUTEOCx , where x is either 0 or 1 depending on
the current mute status of the output.
F01MUTEO*1
Mute all outputs (1-8, A-
D) .
F01MUTEO*111111111111
F01MUTEO*0
Unmute all outputs (1-8,
A-D) .
F01MUTEO*000000000000
F01MUTEO*111111110000
Mute outputs 1-8 and
unmute outputs A-D.
F01MUTEO*111111110000
F01MUTEO*2
Toggle mute status of all
outputs.
F01MUTEO*abcdefghijkl where each of the letters
(a, b, etc.) is either 0 or 1 depending of the current
status of the mute on the corresponding output. If this
command was sent after the example above, then the
status message would be F01MUTEO*000000001111
.
F01MUTEO*?
Query mute status of all
outputs.
F01MUTEO*abcdefghijkl , where each of the letters
(a, b, etc.) is either 0 or 1 depending of the current
status of the mute on the corresponding output. If this
command was sent after the example above, then the
status message would be F01MUTEO*000000001111
8.98. NC -- Enable Noise Cancellation
This command sets or queries the status of the Noise Cancellation (NC) algorithm on input channels 1-8 .
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information on this type
of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01NC31
Enable NC on input channel 3 .
F01NC31
F01NC10
Disable NC on input channel 1 .
F01NC10
F01NC12
Toggle NC state on input channel 1 .
F01NC1x , where x is 0 or 1 depending on the current
state of NC on input channel 1 .
F01NC2?
Query NC state on input channel 2 .
F01NC2x , where x is 0 or 1 depending on the current
state of NC on the input channel.
F01NC*1
Enable NC on input channels 1-8 .
F01NC*11111111
F01NC*0
Disable NC on all microphone input
channels (1-8) .
F01NC*00000000
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info