628495
71
Zoom out
Zoom in
Previous page
1/105
Next page
F01MACROA62,MUTEOMYMOTHERINLAW
Would not return an error because it contains a
MUTEO command. An error would be returned when the macro is
executed with a
MACROX or MACROQ command and it tries to execute the MUTEO command with strange data.
The proper sequence for creating a macro (macro number 112 in this example) is as follows.
F01MACROS112
F01MACROA112,MUTEI*0
F01MACROA112,GAINI*0
F01MACROA112,MUTEO*0
F01MACROW112
This defines macro number 112 to unmute all inputs, set all input gains to 0 dB, and unmute all outputs. It is
acceptable if another command is sent in between these commands (such as F01NC*? ) as long as it isn't
another non-volatile memory command which could interfere with the storage of the macro.
8.81. MACROK -- Delete One or All Macros
This command kills (deletes) the specified macro. If the wildcard character (*) is used the specify the macro
number, then all macros are deleted. Deleting all macros via MACROK* is more efficient than deleting them all
individually since it requires less writes to non-volatile memory.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved each time it
is changed. It will retain its value after power-down. Since this command writes to non-volatile memory, there
will be a delay before an acknowledgment is returned.
Example Description Status Message
F01MACROK25
Delete all the commands associated with macro number 25.
F01MACROK25
F01MACROK*
Delete all the commands associated with all 255 macros.
F01MACROK*
8.82. MACROL -- List All Commmands in a Macro
This command lists all the commands in a given macro. For example, assume that a macro has been defined via
the following command sequence.
F01MACROS112
F01MACROA112,MUTEI*0
F01MACROA112,GAINI*0
F01MACROA112,MUTEO*0
F01MACROW112
Once this macro has been defined, issuing the command:
F01MACROL112?
Will result in the following status messages:
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info