628495

Polycom Vortex EF2280 Manual

64
Zoom out
Zoom in
Previous page
1/105
Next page
Example Description Status Message
F01LIEN1
Enable automatic logic input status messages.
F01LIEN1
F01LIEN0
Disable automatic logic input status messages.
F01LIEN0
F01LIEN2
Toggle automatic logic input status messages.
F01LIENx , where x is 0 or 1 depending on the
current setting of LIEN.
F01LIEN?
Query automatic logic input status messages.
F01LIENx , where x is 0 or 1 depending on the
current setting of LIEN.
8.68. LIG -- Configure Logic Input Pins Into a Group
This conmmand configures which logic input pins are in a group. Logic groups allow events to happen when
certain combinations of inputs are present on the logic pins. For example, if a logic group was defined that
consisted of three logic input pins (pin 1, pin 2, and pin 3), then a total of eight combinations (2
3
) are possible,
and a command or macro can be assigned to each combination. This feature is particularly useful in room-
combining applications. It can also be used to make controls based on rotary switches that output binary, BCD,
or Gray codes.
Commands can be assigned to the configurations of a logic group via the
LIN command.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved each time it
is changed. It will retain its value after power-down. Since this command writes to non-volatile memory, there
will be a delay before an acknowledgment is returned.
Example Description Status Message
F01LIG2,000011110000000000000000
Configure
Logic Group 2
to contain logic
input pins 5-8.
F01LIG2,000011110000000000000000
F01LIG2,01101001000010000000000
Configure
Logic Group 2
to contain logic
input pins 2, 3,
5, 8, and 13.
Note that the
pins in a logic
group do not
have to be
contiguous.
F01LIG2,01101001000010000000000
F01LIG2,?
Query which
pins are in
logic group 2.
F01LIG2,abcdefghijklmnopqrstuvwx ,
where a-x are each 0 or 1 depending on which
logic input pins are assigned to logic group 2.
8.69. LIK -- Delete One or All Logic Input Pin Commands
This command "kills" or deletes all commands for a given logic input pin. In other words, the commands
associated with
LIA, LID, and LIH will be deleted for the specified logic input. A wildcard character can also be
specified for the logic input pin, in which case the commands for all logic input pins will be deleted.
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info