628495
57
Zoom out
Zoom in
Previous page
1/105
Next page
This command sets or queries the status of the Automatic Gain Control (AGC) algorithm on input channels A-D .
This command was introduced in firmware version 2.5.0.
This command is a channel boolean command. See
Section 6.3 and Section 6.1 for more information on this type
of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01LAGCB1
Enable AGC on input channel B.
F01LAGCB1
F01LAGCA0
Disable AGC on input channel A.
F01LAGCA0
F01LAGCC2
Toggle AGC state on input channel C .
F01LAGCCx , where x is 0 or 1 depending on the
current state of the AGC on input channel C .
F01LAGCD?
Query AGC state on input channel D .
F01LAGCDx , where x is 0 or 1 depending on the
current state of the AGC on input channel D .
F01LAGC*1
Enable AGC on input channels A-D.
F01LAGC*1111
F01LAGC*0
Disable AGC on input channels A-D.
F01LAGC*0000
F01LAGC*2
Toggle AGC state on input channels A-D.
F01LAGC*abcd , where a-d are each 0 or 1 depending
on the current state of the AGC for each of the four line
input channels.
F01LAGC*?
Query AGC state on input channels A-D.
F01LAGC*abcd , where a-d are each 0 or 1 depending
on the current state of the AGC for each of the four line
input channels.
8.58. LAGCLINKAB -- Enable or Disable Stereo AGC Linking on
Inputs A and B
This command links the line input AGC of inputs A and B into a stereo pair. The overall volume level of the stereo
signal will be analyzed, and the same gain will be applied to both channels.
This command has some side effects on the way the other line input AGC commands work. When LAGCLINKAB
is first enabled, the settings for
LAGC, LAGCMAX, LAGCMIN, and LAGCRATE on channel A will be copied to
channel B. The original settings for channel B will not be restored after LAGCLINKAB is disabled.
Acknowledgements will be sent for any changes to channel B. From then on, any changes for these commands
for either channel A or B will be set for both channels, and acknowledgements will be sent for both channels.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01LAGCLINKAB1
Enable stereo AGC linking on inputs
A and B.
F01LAGCLINKAB1
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info