628495

Polycom Vortex EF2280 Manual

54
Zoom out
Zoom in
Previous page
1/105
Next page
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01GAINO210
Set gain on output
channel 2 to 10 dB.
F01GAINO210
F01GAINO2?
Query the gain on output
channel 2 .
F01GAINO2x , , where x is a number between -100
and 20, depending on the current setting of the gain on
output channel 2 .
F01GAINO*6
Set the gain on all
output channels (1-8, A-
D) to 6 dB.
F01GAINO*èèèèèèèèèèèè
F01GAINO*ääääääääìììì
Set gain on output
channels 1-8 to 0 dB and
gain on output channels
A-D to 9 dB.
F01GAINO*ääääääääìììì
F01GAINO*?
Query gain settings on
all output channels (1-8,
A-D) .
F01GAINO*abcdefghijkl, where a-l are each
between <space> and ÿ, depending on the current
setting of the gains for each of the twelve output
channels (1-8, A-D).
8.52. GATE -- Query Gating Status Information
This command is used to query the gating status of the microphone inputs. The command can be used to query
the status of individual microphones, or the wildcard character can be used to query the status of all the
microphone inputs.
The
GATEEN can be used to have gating information sent automatically instead of having to poll this command.
Also see the
CGATE command, which only reports microphones that have been gated on for a specified hold
time.
Example Description Status Message
F01GATE3?
Query gating status of microphone
input 3 .
F01GATE3x , where x is 0 or 1 depending on whether the
input is gated off or gated on, respectively.
F01GATE*?
Query gating status of all
microphone inputs.
F01GATE*abcdefgh , where each letter (a, b, etc.) is
either 0 or 1 depending on whether the corresponding
microphone input is gated off or gated on, respectively.
8.53. GATEEN -- Enable Automatic Gating Messages
This command controls whether or not gating information messages are sent automatically. If GATEEN is
enabled, then a GATE*? query is performed each time the gating status of any microphone changes. For
example, if no microphones are currently gated on and GATEEN is enabled, then if microphone input 3 gates on,
the following status message will be automatically generated:
F01GATE*00100000
See the
GATE command for more information.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info