628495
51
Zoom out
Zoom in
Previous page
1/105
Next page
minimum and maximum values for this command are 0 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01GAINGIL7
Set gain of all line inputs to 7 dB.
F01GAINIA7
F01GAINIB7
F01GAINIC7
F01GAINID7
F01GAINGIL>3
Increase incoming gain on all line inputs by
3 dB.
F01GAINIAa
F01GAINIBb
F01GAINICc
F01GAINIDd ,
where a, b, c, and d are the new values of each
of the line inputs. If this command was issued
after the example above, then the status
messages would be:
F01GAINIA10
F01GAINIB10
F01GAINIC10
F01GAINID10 .
F01GAINGIL?
Query gains on all line inputs.
F01GAINIAa
F01GAINIBb
F01GAINICc
F01GAINIDd ,
where a, b, c, and d are the new values of each
of the line inputs. If this command was issued
after the example above, then the status
messages would be:
F01GAINIA10
F01GAINIB10
F01GAINIC10
F01GAINID10 .
8.49. GAINGIM -- Set Gain of Microphone Inputs as a Group
This command sets the gains of all the microphone inputs simultaneously. This is different from using a wildcard,
* with the
GAINI command because that command sets all the mic and line inputs together, while the GAINGIM
sets only the mic inputs.
This command will generate acknowledgements from each of the mic inputs separately.
This command is an integer command. See
Section 6.2 for more information on this type of command. The
minimum and maximum values for this command are 0 and 30, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info