628495
46
Zoom out
Zoom in
Previous page
1/105
Next page
ERROR#091
This error indicates an EF Bus software handshaking error. This could happen if bussed units
are not powered on simultaneously. Powering the units up simultaneously should remove the
error.
ERROR#092
This error indicates an EF Bus ID conflict. See the Vortex user manual for information on valid
device IDs.
ERROR#093
This error indicates an EF Bus reference conflict. This error occurs when more than one Vortex
is placing its AEC reference on the bus. Use the
BUSREF command to remove the extra
reference(s) in order to resolve the conflict.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved each time it
is changed. It will retain its value after power-down. Since this command writes to non-volatile memory, there
will be a delay before an acknowledgment is returned.
Example Description Status Message
F01ERROR1
Enable error messages.
F01ERROR1
F01ERROR0
Disable error messages mode.
F01ERROR0
F01ERROR2
Toggle error message mode.
F01ERRORx , where x is 0 or 1 depending on the current state of
error mode.
F01ERROR?
Query the state of error mode.
F01ERRORx , where x is 0 or 1 depending on the current state of
error mode.
8.42. FADERGIL -- Set Fader Gain of Line Inputs as a Group
This command sets the fader gains of all the line inputs simultaneously. This is different from using a wildcard, *
with the
FADERI command because that command sets all the mic and line inputs together, while the
FADERGIL sets only the line inputs.
This command will generate acknowledgements from each of the line inputs separately.
This command is an integer command. See
Section 6.2 for more information on this type of command. The
minimum and maximum values for this command are -100 and 20, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01FADERGIL7
Set fader gain of all line inputs to 7 dB.
F01FADERIA7
F01FADERIB7
F01FADERIC7
F01FADERID7
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info