628495
25
Zoom out
Zoom in
Previous page
1/105
Next page
F01AMAUTO31
Select automatic thresholds for
automixer gating on input
channel 3 .
F01AMAUTO31
F01AMAUTO30
Select manual thresholds for
automixer gating on input
channel 3 .
F01AMAUTO30
F01AMAUTO32
Toggle between automatic and
manual thresholds for automixer
gating on input channel 3 .
F01AMAUTO3x , where x is 0 or 1 depending on whether
input channel 3 is currently set for manual or automatic
thresholds.
F01AMAUTO3?
Query AMAUTO state on input
channel 3 .
F01AMAUTO3x , where x is 0 or 1 depending on whether
input channel 3 is currently set for manual or automatic
thresholds.
F01AMAUTO*1
Select automatic thresholds for
automixer gating on input
channels 1-8.
F01AMAUTO*11111111
F01AMAUTO*0
Select manual thresholds for
automixer gating on input
channels 1-8.
F01AMAUTO*00000000
F01AMAUTO*2
Toggle between manual and
automatic thresholds for
automixer gating input channels
1-8.
F01AMAUTO*abcdefgh, where a-h are each 0 or 1
depending on whether each input channel is currently set for
manual or automatic thresholds.
F01AMAUTO*?
Query AMAUTO state on input
channels 1-8.
F01AMAUTO*abcdefgh, where a-h are each 0 or 1
depending on whether each input channel is currently set for
manual or automatic thresholds.
8.10. AMBUSID -- Set Automixer Groupings for EF Bus
This command is used to assign one of the two internal automixers to one of the EF Bus automixer groups. For
example, consider three EF2280's, each of which has four microphones assigned to Automixer 1 and four
microphones assigned to Automixer 2. Now, if each of these EF2280's sets their Automixer 1 to have Bus ID 5,
then the three automixers (one from each EF2280) will work as a single automixer containing 12 (3 x 4)
microphones. Setting AMBUSID to 0 means that the specified automixer is not grouped on the bus.
The first argument in the AMBUSID command is the automixer number (1 or 2) and the second argument is the
Bus ID (0 for none, or 1 through 8). Although this command is a channel integer command, use of the wildcard
character for the automixer number is not supported.
This command is a channel integer command. See
Section 6.3 and Section 6.2 for more information on this type
of command. The minimum and maximum values for this command are 0 and 8, respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
F01AMBUSID12
Configure Automixer 1 to be part of the
Bus Automixer having Bus ID 2.
F01AMBUSID12
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2280 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2280 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2280

Polycom Vortex EF2280 User Manual - English - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info