628483
80
Zoom out
Zoom in
Previous page
1/85
Next page
T01SGGAIN6
Set signal generator gain to 6 dB.
T01SGGAIN6
T01SGGAIN>3
Increase signal generator gain by 3 dB.
T01SGGAINx, where x is the new value of
the signal generator gain. If this command
was issued after the example above, then the
status message would be T01SGGAIN9.
T01SGGAIN?
Query signal generator gain.
T01SGGAINx, where x is the new value of
the signal generator gain. If this command
was issued after the example above, then the
status message would be T01SGGAIN9.
8.103. SGMUTE -- Mute Signal Generator
This command controls the muting of the signal generator.
This command is a boolean command. See
Section 6.1 for more information on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
T01SGMUTE1
Mute signal generator.
T01SGMUTE1
T01SGMUTE0
Unmute signal generator.
T01SGMUTE0
T01SGMUTE2
Toggle mute on signal generator.
T01SGMUTEx, where x is 0 or 1 depending on the
current state of the signal generator mute.
T01SGMUTE?
Query signal generator mute.
T01SGMUTEx, where x is 0 or 1 depending on the
current state of the signal generator mute.
8.104. SGTYPE -- Set Type of Signal Produced by Signal
Generator
This command sets the type of signal produced by the internal signal generator. Setting the type to 0
produces white noise, while setting the type to 1 produces pink noise.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
T01SGTYPE0
Configure signal generator to produce
white noise.
T01SGTYPE0
T01SGTYPE1
Configure signal generator to produce
pink noise.
T01SGTYPE1
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2201 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2201

Polycom Vortex EF2201 User Manual - English - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info