628483
78
Zoom out
Zoom in
Previous page
1/85
Next page
has been previously defined via the PRESETW command. If the specified preset is empty, then an error
condition of ERROR#070 will be returned. If one or more of the commands in the preset generated
errors, then an error condition of ERROR#072 will be returned.
When the PRESETQ command executes, status messages for all of the commands in the preset will not
be generated. The PRESETQ command is provided so that a control system can execute a preset and
not generated heavy data traffic from the resulting status messages. Of course, this assumes that the
control system is not interested in any of the acknowledgements. The
PRESETX command can be used
to execute the preset without suppressing the status messages.
Example Description Status Message
T01PRESETQ18
Execute preset number 18 without generating any status
messages.
T01PRESETQ18
8.98. PRESETW -- Save a Preset
This command writes the current settings of the device into the user preset with the specified number.
Since the factory presets (0 - 15) are read-only, an ERROR#071 will be generated if they are specified
in the PRESETW command.
Once a preset it saved, it can be recalled via the PRESETX and PRESETQ commands. The preset can
also be set to be executed automatically at power-up via the
PRESETP command.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
volatile memory, there will be a delay before an acknowledgment is returned.
Example Description Status Message
T01PRESETW18
Save the current device settings as preset 18.
T01PRESETW18
8.99. PRESETX -- Execute a Preset
This command executes the preset corresponding to the specified number, which must be between 0
and 47. The preset must either be a pre-defined factory preset (0 - 15) or a user preset (16 - 47) that
has been previously defined via the
PRESETW command. If the specified preset is empty, then an error
condition of ERROR#070 will be returned. If one or more of the commands in the preset generated
errors, then an error condition of ERROR#072 will be returned.
When the PRESETX command executes, status messages for all of the commands in the preset will be
generated (unless
acknowledgement mode is turned off). The status messages can be suppressed by
using the
PRESETQ command, which is exactly the same as the PRESETX command except that status
messages are suppressed.
Example Description Status Message
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2201 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2201

Polycom Vortex EF2201 User Manual - English - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info