628483
74
Zoom out
Zoom in
Previous page
1/85
Next page
T01PEQOGT,1,?
Query current gain setting of
parametric EQ on output T, band
1.
T01PEQOGT,1,g, where g is the current
setting of the gain parameter for the
parametric EQ on output T, band 1. If the gain
parameter of this filter is set to the same
value given in the example above, then the
status message will be T01PEQOGT,1,-20.
8.90. PEQOS -- Set Slope Parameter for Specified Parametric
EQ Output Stage
This command sets or queries the slope parameter (in dB per octave) for the parametric equalizer (EQ)
filters on output channel T. Each channel has five bands of parametric EQ that can be independently
controlled.
For the Linkwitz-Riley filters, the slope can either be 12 or 24 (dB/Octave).For the low shelf and high
shelf filters, the minimum value for the slope parameter is 1, and the maximum value is 1.2 times the
current value of the gain parameter. See the
PEQIG command for information on the gain parameter.
This command has the same format and restrictions as the
PEQOA command except that only one
parameter, the slope, is specified instead of all the parameters. See the
PEQOA command for more
information. To set the slope parameter for an input parametric EQ filter, use the
PEQIS command. To
set all the parameters for an input parametric EQ filter, use the
PEQIA command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
T01PEQOST,2,1
Set the slope of the parametric
EQ on output T, band 2 to 1 dB
per octave.
T01PEQOST,2,1
T01PEQOST,1,?
Query current slope setting of
parametric EQ on output T, band
1.
T01PEQOST,1,s, where s is the current
setting of the slope parameter for the
parametric EQ on output T, band 1. If the slope
parameter of this filter is set to the same value
given in the example above, then the status
message will be T01PEQOST,1,1.
8.91. PEQOT -- Set Type Parameter for Specified Parametric
EQ Output Stage
This command sets or queries the type parameter for the parametric equalizer (EQ) filters on output
channel T. Each channel has five bands of parametric EQ that can be independently controlled.
The type parameter specifies what type of filter is executed for the specified band of the specified
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2201 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2201

Polycom Vortex EF2201 User Manual - English - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info