628483
72
Zoom out
Zoom in
Previous page
1/85
Next page
Example Description Status Message
T01PEQOBT,2,40
Set bandwidth of parametric EQ
on output T, band 2 to 40
1/100th octaves.
T01PEQOBT,2,40
T01PEQOBT,1,?
Query current bandwidth setting
of parametric EQ on output T,
band 1.
T01PEQOBT,1,b, where b is the current setting
of the bandwidth parameter for the parametric
EQ on output T, band 1. If the bandwidth
parameter of this filter is set to the same value
given in the example above, then the status
message will be T01PEQOBT,1,40.
8.87. PEQOE -- Set Enabled Parameter for Specified
Parametric EQ Output Stage
This command sets or queries the enabled parameter (0 = filter is disabled, 1 = filter is enabled) for
the parametric equalizer (EQ) filters on output channel T. Each channel has five bands of parametric EQ
that can be independently controlled.
This command has the same format and restrictions as the
PEQOA command except that only one
parameter, the enabled status, is specified instead of all the parameters. See the
PEQOA command for
more information. To set the enabled parameter for an input parametric EQ filter, use the
PEQIE
command. To set all the parameters for an intput parametric EQ filter, use the
PEQIA command.
This command is saved to non-volatile memory only as part of a preset. The state of this command will
be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description Status Message
T01PEQOET,2,1
Enable parametric EQ on output
T, band 2.
T01PEQOET,2,1
T01PEQOET,1,?
Query enabled status of
parametric EQ on output T, band
1.
T01PEQOET,1,e, where e is the current
setting of the enabled parameter for the
parametric EQ on output T, band 1. If the
enabled parameter of this filter is set to the
same value given in the example above, then
the status message will be T01PEQOET,1,1.
8.88. PEQOF -- Set Frequency Parameter for Specified
Parametric EQ Output Stage
This command sets or queries the frequency parameter (in Hz) for the parametric equalizer (EQ) filters
on output channel T. Each channel has five bands of parametric EQ that can be independently
controlled.
The minimum and maximum values for the frequency parameter are 20 and 20000, respectively.
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom Vortex EF2201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom Vortex EF2201 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom Vortex EF2201

Polycom Vortex EF2201 User Manual - English - 43 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info