628302
38
Zoom out
Zoom in
Previous page
1/55
Next page
User’s Guide for Polycom HDX Room Systems
Polycom, Inc. 33
You can view Contact details in the system’s local interface. Highlight the
Contact and press . A dialog appears with the display name, address, call
speed, and group.
Including Multiple Sites in Calls
During a multipoint call, multiple sites can see and hear each other. You can
also share content in a multipoint call, just as you can in a point-to-point call.
All systems can participate in multipoint calls. To host multipoint calls, your
system must have optional software installed. You can host multipoint calls
using a video conferencing system with multipoint capabilities, or you can use
a bridge such as the Polycom RMX 1000, Polycom RMX 2000, or Polycom
MGC™.
Placing a Multipoint Call
How you place a multipoint call depends on whether you’re using a Polycom
HDX system with multipoint capabilities or a bridge such as the Polycom
MGC or Polycom RMX conference platform. The number of sites allowed in
the call is determined by the capabilities of the system or bridge hosting the
call. The call can include any combination of IP H.323, SIP, ISDN, V.35/Serial,
and audio-only endpoints, although some ISDN systems might not be
configured to allow mixed IP and ISDN calls. For more information about call
types, refer to Types of Video Calls You Can Make on page 8.
In a Call The system is set to Available and is registered
with a presence service. It is in a call but is
available to receive another call.
Unknown Presence The presence state is unknown. The Contact
was created locally or is not registered with a
presence service.
Idle The system is a desktop client that is available
but is currently idle.
Offline The system is powered off or is offline.
Icon Presence Description
If your multipoint calls disconnect after 5 minutes, your system might be set up for
the multipoint trial. To do untimed multipoint conferences, a multipoint key must be
installed. Contact your administrator for assistance.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polycom HDX Room Systems at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polycom HDX Room Systems in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polycom HDX Room Systems

Polycom HDX Room Systems User Manual - German - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info