Manual Polti Vaporetto Lecoaspira FAV50 Multifloor (page 12 of 20) (English)

648711

Zoom out

Zoom in

1/20

supplied (10) to the universal brush (2) (see page 5).

4.4 (see page 5) Turn on the boiler by pressing the boiler button

and adjust the strength of the steam using the steam adjustment

dial (to turn the boiler off press the boiler button again); for this

type of surface we recommend steam level 1/2. The steam

indicator light ( ) will start flashing and continue until the correct

temperature has been reached.

4.5 Deactivate the steam lock and continue with the steam

delivery and suction, pressing the steam trigger on the handle,

and the suction button on the appliance. The cloth will remove

the dirt and the steam with sanitise the surface.

4.6 Alternatively, the Multifloor Function can be used by

pressing the boiler button again when the steam indicator light

( ) is constant (see Chapter 10).

5. CLEANING RUGS AND CARPETS

Make sure that you have prepared the appliance following the

instructions listed in Chapter 1 and connect the accessories

listed in Chapter 2.

5.1 Lock the two extension tubes (3) onto the handle (1).

5.2 Connect the universal brush (2) to the rug/carpet frame (2c)

(see page 4).

5.3 For suction only, press the suction button on the appliance

to proceed with cleaning.

To adjust the suction power, hold the suction button down (the

suction indicators will start to light up) until the desired suction

level is reached.

5.4 (see page 5) For steam cleaning and suctionturn on the boiler

by pressing the boiler button and adjust the strength of the steam

using the steam adjustment dial (to turn the boiler off press the

boiler button again); for this type of surface we recommend steam

level 3. The steam indicator light ( ) will start flashing and

continue until the correct temperature has been reached.

5.5 Deactivate the steam lock and continue with the steam

delivery and suction, pressing the steam trigger on the handle,

and the suction button on the appliance.

5.6 It is possible to use the suction and steam features either

together or by alternating them, activating both as described in

the previous points.

Alternatively, the Multifloor Function can be used by pressing

the boiler button again when the steam indicator light

( ) is constant (see Chapter 10).

Combined use of steam and suction allows the most efficient

sanitising of the surface, dissolving dirt and removing grease,

germs and mites; it allows brightens the colour of fibres and

dries surfaces more quickly.

6. CLEANING GLASS, WINDOWS AND TILES

Make sure that you have prepared the appliance following the

instructions listed in Chapter 1 and connect the accessories

listed in Chapter 2.

6.1 (see page 5) Turn on the boiler by pressing the boiler button

and adjust the strength of the steam using the steam adjustment

dial (to turn the boiler off press the boiler button again); for this

type of surface we recommend steam level 3. The steam indicator

light ( ) will start flashing and continue until the correct

temperature has been reached.

6.2 Connect the steam + suction nozzle (7) to the handle (1) or

to the extension tubes (3) and attach the window cleaning

accessory (7a) (see page 5).

Ensure that the steam lock on the handle is deactivated.

6.3 Press and hold the steam trigger on the handle (1) and

steam the surface abundantly to dissolve the dirt.

6.4 Activate suction and run the steam + suction nozzle (7) with

the window cleaning accessory (7a) over the surface to proceed

with the drying.

To adjust the suction power, hold the suction button down (the

suction indicators will start to light up) until the desired suction

level is reached.

The steam + suction nozzle (7) with the window cleaning

accessory (7a) allows cleaning to be completed quickly and

simply, without marks and smears.

The combined use of steam and suction allows the most

efficient sanitising of the surface, dissolving dirt, and eliminating

grease and germs, and above all allows drying of the surface.

7. CLEANING UPHOLSTERY

(mattresses, sofas, car interiors, etc.)

Make sure that you have prepared the appliance following the

instructions listed in Chapter 1 and connect the accessories

listed in Chapter 2.

7.1 For suction only, connect the nozzle for frames (7) to the

WARNING: Before cleaning leather or fabrics with steam,

consult the manufacturer’s instructions and always carry out a

test on a hidden part or on a sample of the material. Allow the

steamed part to dry to make sure that no changes in colour or

deformations have occurred.

WARNING: To clean glass surfaces during cold weather,

preheat the windows starting to vacuum from a distance of

about 50 cm from the surface.

For safety reasons, engage the steam lock on the handle

during vacuuming.

WARNING: Before cleaning fabrics with steam, consult the

manufacturer’s instructions and always carry out a test on a

hidden part or on a sample of the material. Allow the steamed

part to dry to make sure that no changes in colour or

deformations have occurred.

Before removing the cloth from the brush, wait a few minutes

to allow the cloth to cool.

WARNING: For additional safety, test steam delivery on a

hidden part, leave the steamed part to dry to ensure that no

changes in colour or deformations have occurred.

| 27|

ENGLISH

LECOASPIRA FAV50 - M0S11128 - 1P04:UNICO 08/05/2015 16.30 Pagina 27

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira FAV50 Multifloor in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira FAV50 Multifloor

Polti Vaporetto Lecoaspira FAV50 Multifloor User Manual - German - 21 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Polti Vaporetto Lecoaspira FAV50 Multifloor Manual

Product: