648710

Polti Vaporetto Lecoaspira FAV30 Manual

14
Zoom out
Zoom in
Previous page
1/22
Next page
| 30 |
4.5 Deactivate the steam lock and continue with the steam
delivery and suction, pressing the steam trigger on the handle,
and the suction button on the appliance. The cloth will remove
the dirt and the steam with sanitise the surface.
5. CLEANING RUGS AND CARPETS
Make sure that you have prepared the appliance following the
instructions listed in Chapter 1 and connect the accessories
listed in Chapter 2.
5.1 Lock the two extension tubes (3) onto the handle (1).
5.2 Connect the universal brush (2) to the rug/carpet frame (2c)
(see page 4).
5.3 For suction only, press the suction button on the appliance
to proceed with cleaning.
5.4 (see page 5) For steam cleaning and suctionturn on the boiler
by pressing the boiler button and adjust the strength of the steam
using the steam adjustment dial (to turn the boiler off press the
boiler button again); for this type of surface we recommend steam
level 3. The steam indicator light ( ) comes on, and then turns
off when the correct temperature has been reached.
5.5 Deactivate the steam lock and continue with the steam
delivery and suction, pressing the steam trigger on the handle,
and the suction button on the appliance.
5.6 It is possible to use the suction and steam features either
together or by alternating them, activating both as described in
the previous points.
Combined use of steam and suction allows the most efficient
sanitising of the surface, dissolving dirt and removing grease,
germs and mites; it allows brightens the colour of fibres and
dries surfaces more quickly.
6. CLEANING GLASS, WINDOWS AND TILES
Make sure that you have prepared the appliance following the
instructions listed in Chapter 1 and connect the accessories
listed in Chapter 2.
6.1 (see page 5) Turn on the boiler by pressing the boiler button
and adjust the strength of the steam using the steam adjustment
dial (to turn the boiler off press the boiler button again); for this
type of surface we recommend steam level 3. The steam indicator
light ( ) comes on, and then turns off when the correct
temperature has been reached.
6.2 Connect the steam + suction nozzle (7) to the handle (1) or
to the extension tubes (3) and attach the window cleaning
accessory (7a) (see page 5).
Ensure that the steam lock on the handle is deactivated.
6.3 Press and hold the steam trigger on the handle (1) and
steam the surface abundantly to dissolve the dirt.
6.4 Activate suction and run the steam + suction nozzle (7) with
the window cleaning accessory (7a) over the surface to proceed
with the drying.
The steam + suction nozzle (7) with the window cleaning
accessory (7a) allows cleaning to be completed quickly and
simply, without marks and smears.
The combined use of steam and suction allows the most
efficient sanitising of the surface, dissolving dirt, and eliminating
grease and germs, and above all allows drying of the surface.
7. CLEANING UPHOLSTERY
(mattresses, sofas, car interiors, etc.)
Make sure that you have prepared the appliance following the
instructions listed in Chapter 1 and connect the accessories
listed in Chapter 2.
7.1 For suction only, connect the nozzle for frames (7) to the
handle (1) and press the suction button on the appliance to
proceed with the cleaning operations.
7.2 For steam cleaning and suction use the nozzle for frames (7)
with the cap (9) attached and connect it to the handle (1) or to the
extension tubes (3) (see page 5).
7.3 (see page 5) Turn on the boiler by pressing the boiler button
and adjust the strength of the steam using the steam adjustment
dial (to turn the boiler off press the boiler button again); for this
type of surface we recommend steam level 1/2. The steam
indicator light ( ) comes on, and then turns off when the correct
temperature has been reached.
Ensure that the steam lock on the handle is deactivated.
WARNING: Before cleaning leather or fabrics with steam,
consult the manufacturer’s instructions and always carry out a
test on a hidden part or on a sample of the material. Allow the
steamed part to dry to make sure that no changes in colour or
deformations have occurred.
WARNING: To clean glass surfaces during cold weather,
preheat the windows starting to vacuum from a distance of
about 50 cm from the surface.
WARNING: For additional safety, test steam delivery on a
hidden part, leave the steamed part to dry to ensure that no
changes in colour or deformations have occurred.
To avoid any dirt in the dirt collector causing bad smells, we
recommend emptying and cleaning after every use according
to the methods described in Chapter 15.
For safety reasons, engage the steam lock on the handle
during vacuuming.
WARNING: Before cleaning fabrics with steam, consult the
manufacturer’s instructions and always carry out a test on a
hidden part or on a sample of the material. Allow the steamed
part to dry to make sure that no changes in colour or
deformations have occurred.
Before removing the cloth from the brush, wait a few minutes
to allow the cloth to cool.
ENGLISH
PRELIMINARE LECOASPIRA FAV20_30 - 2015_vers7:UNICO 22/04/2015 10.45 Pagina 30
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Polti Vaporetto Lecoaspira FAV30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Polti Vaporetto Lecoaspira FAV30 in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Polti Vaporetto Lecoaspira FAV30

Polti Vaporetto Lecoaspira FAV30 User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info